2.Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel.
3.Confirm that the power cord restraint (A), and pin (B) are removed.
1.Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.
2.Check that two (2) cotter pins were removed with the shipping strap.
A
B
A. Power cord restraint | B. Pin |
4. To remove the power cord from the cord restraint, push the power cord in, press TAB, and then pull the power cord out.
Connect Drain Hose
Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow these instructions.
The drain hose is connected to your washer and is stored inside the washer cabinet.
Remove drain hose from washer cabinet
Looped power cord
Gently pull the corrugated drain hose out of the washer from the top of the hose. Continue to pull the hose until the end emerges. Do not force excess drain hose back into the rear of the washer.
Looped power cord
5
