INSTALLATION INSTRUCTIONS
Prepare Drop-In Range
1.Decide on the final location for the range. Locate existing wiring to avoid drilling into or severing wiring during installation.
WARNING
Excessive Weight Hazard
Use two or more people to move and install range. Failure to do so can result in back or other injury.
2.To avoid floor damage, set the range onto cardboard prior to installation. Do not use oven door handle or any portion of the front frame or trim for lifting.
To avoid product damage, do not remove the shipping feet at the front lower corners of the range. The shipping feet will protect the lower oven trim until the range is inserted into cabinet.
3.Remove the shipping materials and tape from the range.
4.Remove the hardware package from inside the bag containing literature.
5.Remove and set aside racks and other parts from inside the oven.
6.Move range and cardboard close to the range’s final location.
Remove Oven Trim
IMPORTANT: Use both hands to remove oven doors.
1.Open the oven door.
2.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.
A | B |
3.Grasp the edges of the oven door with both hands and close the oven door until it stops. Lift and pull oven door toward you and remove. Set the oven door aside on a covered work surface.
4.Remove bottom screw on each side of the oven trim.
5.Grasp the bottom end of trim and pull away from oven.
A
A. Oven trim
6.Slide top end of trim downward to remove trim from oven. Set trim aside.
A. Oven door latch in locked position
B. Oven door latch in unlocked position
5
