INSTALLATION REQUIREMENTS

ToolsandParts

LocationRequirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Required

Phillips screwdriver

Level

⁹⁄₁₆" (14 mm) open-end

Measuring tape

 

wrench (for leveling leg

 

 

 

locknuts)

 

 

Parts Supplied

Console

Brackets (2)

Screws (2)

Your laundry tower can be installed freestanding or between your washer and dryer. Proper installation is your responsibility.

Installation Clearances

The location must be large enough to allow the drawers to be fully opened.

When you are installing your laundry tower between or next to your washer and dryer, a spacing of 1" (2.5 cm) on the sides of the laundry tower is recommended to reduce noise transfer.

Additional spacing should be considered for ease of installation and servicing.

Laundry Tower Dimensions

38⁵⁄₈"*

36"*

(91.4 cm)

(98.1 cm)

AB

A. Console

B. Bracket

25¹⁄₈"**

(63.8 cm)

42⁷⁄₈"

(108.8 cm)

13¹⁄₂"

(34.3 cm)

*Includes leveling feet

**Includes drawer front

INSTALLATION INSTRUCTIONS

InstalltheConsole(optional)

WARNING

Excessive Weight Hazard

Use two or more people to move and install laundry tower.

Failure to do so can result in back or other injury.

1.Using two or more people, situate the laundry tower near its final location. Open the drawers to remove any contents stored inside.

2.Using a Phillips screwdriver, remove the 2 outside screws from the back of the laundry tower top panel and discard them.

A

A. Outside screws

2

Page 2
Image 2
Whirlpool W10101293A Installation Requirements, Installation Instructions, ToolsandParts, InstalltheConsoleoptional

W10101293A specifications

The Whirlpool W10101293A is a high-efficiency water filter that is designed to provide clean and refreshing water for your household needs. This particular model is compatible with various refrigerator brands, enhancing the long-term performance of your appliance while ensuring you have access to pure drinking water at all times. One of the standout features of this water filter is its ability to reduce a range of harmful contaminants, including lead, chlorine, and sediment. This capability ensures that the water you consume is not only safe but also tastes better.

The W10101293A filter uses advanced filtration technology that employs activated carbon to effectively capture impurities. This technology is particularly effective at improving the taste and odor of your drinking water by removing chemicals and other unwanted substances. With an easy installation process, homeowners can replace the water filter without the need for any specialized tools or professional assistance. The filter is designed to fit seamlessly in select Whirlpool and compatible refrigerator models, making it a versatile choice for many.

Another characteristic that makes the Whirlpool W10101293A a popular choice is its impressive lifespan. Each filter can last up to six months, depending on water usage and the level of contaminants present in your water supply. This longevity reduces the frequency and cost associated with filter replacements, providing convenience for busy households. Additionally, the filter is certified by the NSF (National Sanitation Foundation), ensuring it complies with rigorous safety and quality standards.

Moreover, the W10101293A is eco-friendly, as it aims to contribute to environmental sustainability by reducing the need for bottled water. By providing an affordable solution for clean water, this filter not only promotes a healthier lifestyle but also aids in reducing plastic waste. With its blend of advanced features, reliable performance, and environmental benefits, the Whirlpool W10101293A water filter is an essential accessory for any modern kitchen, ensuring that families can enjoy clean, crisp water straight from their refrigerator. Whether it’s for drinking, cooking, or making ice, this filter guarantees peace of mind that you are consuming water of the highest quality.