Whirlpool W10133161A, W10130986A ToturnonLock, lightflashes3times ToturnoffLock, lightturnsoff

Lock- (onHeatDrybutton)usetoavoidunintendeduseofyour dishwasherWhenControlLockislit,allbuttonsaredisabled.The. dishwasherdoorcanbeopenedwhilethecontrolsarelocked.

ToturnonLock:

PressandholdHeatDryforatleast4secondsTheLockedlight.

glowsIfyoupressanypadwhileyourdishwasherlocked,the.

lightflashes3times.

ToturnoffLock:

PressandholdHeatDryforatleast4secondsTheControlLock.

lightturnsoff.

Start or Resume a Cycle
• Run hot water at the sink nearest your dishwasher until	©
the water is hot. Turn off water.	©

START/ f_tJM_

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and mild detergent. If your dishwasher has a stainless steel exterior, a stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31464.

Clean the interior of the dishwasher, with a paste of powdered dishwasher detergent and water or use liquid dishwasher detergent on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe measuring cup on the bottom rack. Run the dishwasher through a complete washing cycle using an air-dry or an energy-saving dry option. Do not use detergent. Vinegar will mix with the wash water.

PushdoorfirmlyclosedThedoorlatchesautomatically.Select.

thewashcycleandoptionsdesiredORpressSTART/RESUME torepeatthesamecycleandoptionsasinthepreviouswash cycle.

Youcanaddanitemanytimebeforethemainwashstarts.

OpenthedoorslowlyandaddtheitemClosethedoorfirmly.. PressSTART/RESUME.

Cycle status indicators allow	s TATU S S_r_sn_ Wasi, n_ OTyl Cleaa 5ani[ized
yOU to follow the progress of

your dishwasher cycle. Clean indicator glows when the cycle is finished.

If you have a drain air gap, check and clean it if the

dishwasher isn'tdraining well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months, turn off the water and power supply to the dishwasher. In the winter, if the dishwasher could be exposed to near freezing temperatures or is left in a seasonal dwelling such as a second home or vacation home, avoid water damage by having your dishwasher winterized by authorized service personnel.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In U.S.A., www.whirlpooLcom

Dishwasher is not operating properly

•Dishwasher does not run or stops during a cycle Is the door closed tightly and latched?

Is the right cycle selected?

Is there power to the dishwasher? Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor automatically resets itself within a few minutes. If it does not restart, call for service.

In Canada, www.whirlpool.ca

Is the water supplied to the dishwasher hot enough? The dishwasher runs longer while heating water.

Is the dishwasher cycle time within the cycle times? See cycle sections wash times. A delay automatically occurs in some wash and rinse cycles until the water reaches the proper temperature.

This dishwasher is equipped with an optical sensor wash that detects water temperature, soil and detergent amount. Wash cycles are adjusted based on what is sensed.

IMPORTANT: The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses. This cycle must not be interrupted for proper sensor adjustment. If

Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several seconds during the main wash.

•Clean light is flashing

The dishwasher has malfunctioned. Call for service.

• Dishwasher will not fill z'_./_

Is the overfill protection float able to

move up and down freely? Press down to release.

•Dishwasher seems to run too long

The dishwasher can run up to 31/2hours depending on soil level, water temperature, cycles and options.

this adjustment cycle is canceled or stopped before the Clean light comes on at the end of the cycle, the next wash cycle will repeat this sensor adjustment.

Water remains in the dishwasher

Is the cycle complete?

Detergent remains in the covered section of the dispenser

Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary.

White residue on the front of the access panel

Was too much detergent used?

Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

4