2
INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water

inletho ses:

Parts supplied:

Tools needed for securing the drain hose and leveling

thewasher:

Parts supplied:

Alternate Parts

Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
■Pliers that open to 1⁹⁄₁₆"
(3.95 cm) ■Flashlight (optional)
A.Drain hose form
B.Water inlet hoses (2)
C.Flat water inlet hose washers (4)
■Adjustable or open end
wrench ⁹⁄₁₆" (14 mm)
■Level
■Wood blo ck
■Ruler or measuring tape
A.Beaded tie strap
B.Front leveling feet with nuts (2)
AB
C
AB
If You Have: You Will Need to Buy:
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
1" (2.5 cm)
diameter
standpipe
1¹⁄₄" (3.2 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter,
Part Number 280130
Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Drain hose too
short Kit Part Number 280131
Lint clogged drain Drain protector, PartNumber 367031