LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ½" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on the hinge side (some models require more) to allow the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10312241A installation instructions LocationRequirements, Electrical Requirements, Recommended Grounding Method
Page 2 Page 4

W10312241A specifications

The Whirlpool W10312241A is a highly regarded refrigerator water filter that is designed to enhance the quality of drinking water and ice produced by compatible Whirlpool refrigerators. It is well-known for its effective filtration system, which utilizes advanced technologies to ensure that consumers can enjoy clean and fresh-tasting water at all times.

One of the main features of the W10312241A is its ability to reduce a wide range of contaminants, including lead, chlorine, sediment, and other potentially harmful substances commonly found in tap water. This ensures that the water you and your family consume is not only safe but also free from undesirable odors and tastes. The filter is certified to meet industry standards, providing users with peace of mind regarding its performance and reliability.

The W10312241A employs a carbon block filtration technology, which is known for its high efficiency in capturing impurities. This technology allows for a substantial reduction in chloramines and volatile organic compounds (VOCs), further enhancing the quality of the water. Users can rest assured that they are drinking water that is not only clean but also crisp and refreshing.

Installation of the W10312241A filter is straightforward and convenient, designed for easy DIY replacements. Users can quickly replace their old filter without the need for professional assistance, which is a significant advantage for busy households. The filter typically needs replacement every six months or after filtering approximately 200 gallons of water, depending on water quality and usage.

Another notable characteristic of the W10312241A is its compatibility with a variety of Whirlpool refrigerator models, making it a versatile option for those who own these appliances. It also meets a range of safety and quality standards set by relevant health organizations, ensuring that it delivers safe and clean drinking water.

Overall, the Whirlpool W10312241A water filter combines effective filtration technology with user-friendly design, making it an excellent choice for families seeking to improve their water quality. With its robust features and dependable performance, this filter stands out as a reliable option for promoting a healthier lifestyle through cleaner drinking water.
Top Page Image Contents