INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Product Dimensions - Single Oven

A

Tools needed

Tape measure

Phillips screwdriver

Flat-blade screwdriver

¹⁄₈" Flat-blade screwdriver

Level

Hand or electric drill

Wrench or pliers

Marker or pencil

Pipe-joint compound resistant to LP gas

³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ceramic floors)

Noncorrosive leak-detection solution

E

B

Pipe wrench

¹⁵⁄₁₆" combination wrench

¹⁄₈" (3.2 mm) drill bit

 

(for wood floors)

For LP/Natural Gas Conversions

½" combination wrench

7 mm nut driver

Masking tape

DC

A. 22¹⁄₄" (56.8 cm) max. recessed width B. 39¹⁄₄" (99.7 cm) max. overall height C. 23⁷⁄₈" (60.6 cm) overall width

Parts needed

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located at bottom front face surface on the right-hand side of the oven frame.

The oven should be located for convenient use in the kitchen.

Recessed installation area must provide complete enclosure around the recessed portion of the oven.

All openings in the wall or floor where oven is to be installed must be sealed.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven.

Grounded electrical supply is required. See “Electrical Requirements” section.

Proper gas supply connection must be available. See “Gas Supply Requirements” section.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

D. 22⁵⁄₈" (57.5 cm) max. recessed depth

E. 37³⁄₄" (95.9 cm) recessed height

Cabinet Dimensions - Single Oven

Single Oven Installed in Cabinet

A

 

B

F

D

 

 

E

 

C

A. 24" (61 cm) min. cabinet width

B. 1¹⁄₂" (3.8 cm) top of cutout to bottom of upper cabinet door

C. 14" (35.6 cm) min. bottom of cutout to floor D. 22³⁄₈" (56.8 cm) cutout width

E. 1¹⁄₂" (3.8 cm) min. bottom of cutout to top of cabinet door F. 38" (96.5 cm) cutout height

NOTE: For gas supply pipe, provide a 3" x 3" (7.6 cm x 7.6 cm) opening in the back wall of the cabinet centered 7" (17.8 cm) from the left rear corner and 3" above the bottom of the cabinet cutout. Install a 120 volt electrical outlet in the back wall of the cabinet centered 6" (15.2 cm) from the right rear corner and 4" (10.2 cm) below the top of the cabinet cutout.

3

Page 3
Image 3
Whirlpool W10526072A installation instructions Installation Requirements, Tools and Parts, Location Requirements

W10526072A specifications

The Whirlpool W10526072A is an advanced refrigerator model designed to enhance the efficiency and convenience of modern kitchen spaces. With its blend of features, technologies, and characteristics, this appliance offers both functionality and style for everyday use.

One of the main features of the W10526072A is its spacious interior. With a generous capacity, it allows homeowners to store a large amount of food and beverages without compromising organization. The design incorporates adjustable shelves, which can be moved or rearranged to accommodate items of various sizes. This flexibility ensures that users can easily optimize space according to their needs.

The Whirlpool W10526072A also integrates advanced cooling technologies. One standout feature is the temperature control system, which helps maintain consistent temperatures throughout the refrigerator. This technology minimizes temperature fluctuations that can negatively impact food freshness. Moreover, it includes a humidity-controlled crisper that keeps fruits and vegetables fresh for a longer period while preventing spoilage.

Energy efficiency is another hallmark of this refrigerator model. It is designed to consume less energy compared to traditional units, contributing to lower utility bills while also being environmentally friendly. The ENERGY STAR certification highlights its commitment to energy-efficient performance, making it a suitable option for eco-conscious consumers.

Additionally, the W10526072A is equipped with a convenient ice and water dispenser, situated on the exterior door. This feature allows quick access to chilled water and ice without the need to open the refrigerator, promoting energy savings while also enhancing convenience during meal preparation.

In terms of design, the Whirlpool W10526072A boasts a sleek and modern aesthetic. The stainless-steel finish not only adds a touch of elegance to the kitchen but is also easy to clean, ensuring that the appliance maintains its appearance over time. The recessed handles provide a seamless look while maximizing space efficiency.

Overall, the Whirlpool W10526072A represents a perfect blend of functionality, style, and energy efficiency. With its spacious interior, advanced cooling technologies, and user-friendly features, this refrigerator is an ideal choice for any household seeking to elevate their kitchen experience. Whether it’s for storing groceries or providing chilled water on demand, the W10526072A is designed to meet the diverse needs of today’s consumers.