INSTALLATION REQUIREMENTS

GAS SUPPLY REQUIREMENTS

Gas supply: This dryer is equipped for use with Natural gas. Dryer can be converted to L.P. gas. When rigid pipe is used it should be 1/2" IPS. When acceptable to the gas supplier and local codes, 3/8" approved tubing may be used for lengths under 20 ft (6.1 m). For lengths over 20 ft (6.1 m), larger tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1.

ELECTRICAL REQUIREMENTS

A 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply is required. A time-delay fuse or circuit breaker and a separate circuit are recommended.

WATER (STEAM MODELS ONLY) REQUIREMENTS

The dryer must be connected to the cold water faucet using new inlet hoses. Do not use old hoses. Do not overtighten. Damage to the coupling can result.

VENTING REQUIREMENTS

Exhaust venting: Exhaust your dryer to the outside. 4" (102 mm) diameter vent is required. Rigid or flexible metal exhaust vent must be used. Do not use plastic or metal foil vet. Exhaust hood must be at least 12" (305 mm) from the ground or any object that may be in the path of the exhaust.

Exhaust hoods:

Recommended Styles:

 

 

 

Louvered Hood

 

Box Hood

Acceptable Style:

Angled Hood

Determine vent path:

■■ Select route that will provide straightest and most direct path outdoors.

■■ Plan installation to use fewest number of elbows and turns.

■■ When using elbows or making turns, allow as much room

as possible.

■■ Bend vent gradually to avoid kinking. ■■ Use as few 90° turns as possible.

Determine vent length and elbows needed for best drying performance:

■■ Use following Vent System Chart to determine type of vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in Vent System Chart. Exhaust systems longer than those specified will:

■■ Shorten life of dryer.

■■ Reduce performance, resulting in longer drying times and increased energy usage.

Vent System Chart

 

Number of

Type

Box/louvered

Angled

 

 

90° elbows

of vent

hoods

hoods

 

 

 

 

 

 

 

 

0

Rigid metal

64 ft. (20 m)

58 ft. (17.7 m)

 

 

 

 

 

 

 

 

1

Rigid metal

54 ft. (16.5 m)

48 ft. (14.6 m)

 

 

 

 

 

 

 

 

2

Rigid metal

44 ft. (13.4 m)

38 ft. (11.6 m)

 

 

 

 

 

 

 

 

3

Rigid metal

35 ft. (10.7 m)

29 ft. (8.8 m)

 

 

 

 

 

 

 

 

4

Rigid metal

27 ft. (8.2 m)

21 ft. (6.4 m)

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Bottom exhaust installations have a 90º turn inside the dryer. To determine maximum exhaust length, add one 90º turn to the chart.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Page 1 Page 2
Page 2
Image 2
Whirlpool WGD96HEA Installation Requirements, Venting Requirements, GAS Supply Requirements, Electrical Requirements
Page 1 Page 2

WGD94HEA, WGD96HEA specifications

The Whirlpool WGD96HEA and WGD94HEA clothes dryers are engineered for high efficiency and user-friendly operation, making them popular choices among homeowners looking to streamline their laundry processing. Both models incorporate advanced technologies and features designed to enhance drying performance and energy efficiency.

One of the standout features of the WGD96HEA is its Ecoboost technology, which optimizes energy usage without compromising drying speed. The dryer utilizes a combination of heat pump technology and efficient drying cycles to minimize energy consumption, making it an environmentally friendly option. This model also features a steam option, which helps reduce wrinkles and refreshes clothes without the need for extensive ironing.

The WGD94HEA also shares many of these eco-friendly features while boasting a slightly different set of drying capacities. Both models offer various drying cycles that accommodate different fabric types and drying needs. Customized cycles include options for delicate fabrics, heavy-duty items, and quick drying, allowing users to select the best setting for their specific needs.

Another significant characteristic of these dryers is the intuitive user interface. The digital controls are straightforward, allowing users to select and adjust drying cycles easily. Additionally, both models are equipped with a large capacity drum, which ensures ample space for drying even large loads of laundry, reducing the need for multiple drying cycles.

Noise reduction technology is another highlight of the WGD96HEA and WGD94HEA. Both dryers operate quietly, minimizing disruptions in the home while efficiently handling laundry loads. The inclusion of a moisture sensor in both models guarantees that clothes are not over-dried, enhancing garment longevity while saving on energy costs.

In terms of build quality, Whirlpool has prioritized durability and performance. With robust construction, these dryers are designed to withstand years of usage while maintaining their efficiency and effectiveness.

In summary, the Whirlpool WGD96HEA and WGD94HEA dryers offer modern features and technologies that cater to the needs of contemporary households. From energy efficiency with Ecoboost technology to user-friendly controls and various drying cycles, both models deliver reliable performance and convenience in laundry care.
Top Page Image Contents