Gas Dryer
PRODUCT MODEL NUMBERS
WGD94HEX, WGD95HEX, WGD97HEX
Front view: | Side view: |
27"
(686 mm)
381/8"
(968 mm)
* Approx. measurement
3/4"*
(18 mm)
Back view:
61/4"
(159 mm)
NOTE: Most installations require a minimum 5" (102 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements”.
Recommended installation clearances (dryer only):
|
|
|
|
|
| 3" |
|
|
| 297/8"* | 18" min. | (76 mm) | |
|
|
| (457 mm) |
| ||
| Water | (759 mm) |
|
|
| |
53/4"* |
|
|
|
| ||
Vent |
| 31/2"* |
|
|
| |
(146 mm) |
|
|
|
| ||
|
|
| (89 mm) |
|
|
|
| Gas |
|
|
|
|
|
|
|
|
| 5" |
| 3" |
|
|
| 61/8"* | (127 mm) |
| |
|
|
|
| (76 mm) | ||
3/4"* | 14 | 3 | (156 mm) |
|
|
|
(18 mm) | /8" |
|
|
|
| |
(365 mm) |
|
|
|
| ||
|
|
|
| 1" | ||
| 253/4" |
|
| 1" |
| |
| (654 mm) |
|
| (25 mm) | (25 mm) | |
48in.2 min. (310 cm2)
24in.2 min. (155 cm2)
Installation spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
■■ | Additional spacing should be considered for ease of |
| installation and servicing. |
■■ | Additional clearances might be required for wall, door, floor moldings, dryer venting, and gas line. |
■■ | Additional spacing should be considered on all sides |
| of the dryer to reduce noise transfer. |
■■ | For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered |
| doors with equivalent ventilitation openings are acceptable. |
■■ | Companion appliance spacing should also be considered. |
