Top Load Washer
PRODUCT MODEL NUMBERS
DRAIN SYSTEM OPTIONS
Electrical:A 120 volt, 60 Hz., AC only,
15-or 20-amp, fused electrical supply is required.
Atime-delay fuse or circuit breaker is recommended.
Itis recommended that a separate circuit serving
onlythis appliance be provided.
BecauseWhirlpool Corporation policy includes a continuous commitment to improve
ourproducts, we reserve the right to change materials and specifications without notice.
Dimensionsare for planning purposes only. For complete details, see Installation
Instructionspacked with product. Specifications subject to change without notice.
Ref.W10240438B
05/2010
RECESSEDAREA OR CLOSET INSTALLATION
Forcloset installation, with a door, the minimum ventilation openings in the top and
bottomof the door are required (view C). Louvereddoors with equivalent air ventilation
openingsare acceptable.
Laundry tub drain system (view C)
Thelaundr y tub needs a minimum
20gal. (76 L) capacity. The top of the
laundry tub must be at least 39"
(990mm) above the floor and no
higherthan 96"(2.4 m) from the
bottomof the washer.
Floordrain system (view D)
Thefloor drain system requires a siphon
breakthat may be purchased separately.
Thesiphon break must be a minimum of
28"(710mm) from the bottom of the
washer.Additional hoses might be
needed.
A
Frontview
B
Sideview
C
Closetdoor with vents

AB CD

Standpipedrain system - wall or floor (view A & B)
Thestandpipe drain requires a minimum diameter standpipe of
2"(51mm). The minimum carr y-away capacity can be no less
than17 gal. (64 L) per minute.
Thetop of the standpipe must be at least 39"(990 mm) high
andno higher than 96"(2.4 m) from the bottom of the washer.
WTW6200V, WTW6500W, WTW6800W
WTW6300W,WTW6340W, WTW7300X
WTW7340X, WTW7800X, WTW7600X
WTW7990X
17"*
(431.8 mm)
1"
(25 mm)
271/2"
(699 mm)
1"
(25 mm)
27"
(686 mm)
5"
(127 mm)
24
"
2*
(155 cm2)
48
"
2*
(310 cm2)
14"
*
max
(356 mm)
3
"
*
(76 mm)
3
"
*
(76 mm)
1"*
(25 mm)
39"
(990mm)
39"
(990mm)
28"
(710mm)
*Required Spacing