Whirlwind Patent-Pending Recessed Wall Frames dimensions

Whirlwind’s Patent-Pending Recessed Wall Frames

These two-piece wall frame assemblies recess exposed connectors, providing greater protection for them and enhancing any installation. Whirlwind patent-pending Wall Frames are currently available to fit 8”x8” and 12”x12” standard NEMA type 1 electrical backboxes. There are two standard recess depths (1” and 2.5”) and frames are available for both flush mount and surface mount applications.

The surface mount version (WFS_ _ _) mounting flanges are the same dimensions as the corresponding backbox.

The flush mount version (WFF_ _ _) mounting flanges extend one-half inch beyond the edge of the backbox on all four sides to provide a visually appealing trim ring effect to the finished wall.

Frame finish is black powdercoat. (Custom finishes available upon request.)

Connector mounting insert panels (WFI_ _ _) attach to the frames and can be custom punched, engraved and loaded by Whirlwind to accommodate any installation requirement. Standard finish is black anodized aluminum.

Other sizes of recessed Wall Frames are also available upon request.

WFS8x8x1B	8" x 8" x 1"
WFS8x8x2.5B	8" x 8" x 2.5"
WFF8x8x1B	9" x 9" x 1"
WFF8x8x2.5B	9" x 9" x 2.5"
WFS12x12x1B	12" x 12" x 1"
WFS12x12x2.5B	12" x 12" x 2.5"
WFF12x12x1B	13" x 13" x 1"
WFF12x12x2.5B	13" x 13" x 2.5"

fits 8" x 8" x 4" surface-mounted electrical box fits 8" x 8" x 6" surface-mounted electrical box fits 8" x 8" x 4" recessed electrical box

fits 8" x 8" x 6" recessed electrical box

fits 12" x 12" x 4" surface-mounted electrical box fits 12" x 12" x 6" surface-mounted electrical box fits 12" x 12" x 4"recessed electrical box

fits 12" x 12" x 6" recessed electrical box

whirlwind · 99 Ling Road Rochester, NY 14612 · 800 733-9473 · http://www.whirlwindusa.com