REMOVING BOBBIN CASE AND BOBBIN
Hinged
1. Raise needle to its highest | 2. Open hinged latch of |
position and open the | bobbin case and pull bob- |
shuttle race cover, | bin case out of machine. |
3.Release the latch and bob bin will fall out easily.
INSERTING BOBBiN INTO BOBBIN CASE
SLOT
1. Pull off 5cm of thread | 2. Guide the end of thread |
from bobbin and insert it | into slot. |
into bobbin case as shown. |
|
Tension spring |
|
3.Pull into slot and under tension spring and draw out about 10 cm of thread.
12
