![](/images/new-backgrounds/1056986/5698621x1.webp)
I NEEDLE THREADING
5.Turn the handwheel toward you until needles
are fully raised.
G.Pass the right and left needle threads as illustrated.
Important: The thread must lie correctly
between the two discs inside the tension dials.
Pass through the needle eyes from front to back as illustrated.
7.Pull out the thread end about 10 cm(4”) long
from the needle eyes. Raise the presser foot and place threads under it, then lower the pres er foot.
Left needle thread | Right needle thread |
| / |
(E
©J
Thread between two discs