HEMMING
1Raise the foot and the needle to its highest position. Replace the foot with the hemmer foot. fabric edge by about 3mm and place it under the foot. Secure the
2.Fold over thewith a few stitches. Take out the workpiece and draw the hem folded edge
into the hei f_ot_bVPk19t thread& | - |
3.Lower the foot and sew the hem.
4.Durning sewing, fold the fabric to the left a little and allow it to run into the hemmer foot.
5.Make sure that the fabric does not move under the right half of the foot. The fabric must be fed into the scroll of the hemmer sufficiently so that the work piece edge runs freely through the groove under the foot.
Only suitable materials can be used and some practice may be necessary to acheive
best results.
— 26 —
