j.To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

k.Allow machine to cool at least 5 minutes before storing.

OPERATION

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

6.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

7.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

8.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

9.Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

10.Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

11.Keep all guards, deflectors and safety devices in place and operating properly.

12.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

13.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

14.Do not operate this machine on a gravel surface.

15.Do not operate this machine while under the influence of alcohol or drugs.

16.Muffler and engine become hot and can cause a burn. Do not touch.

17.Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

4

Page 3 Page 5
Page 4
Image 4
White Outdoor 550 manual Operation
Page 3 Page 5

550 specifications

The White Outdoor 550 is a powerful and versatile lawn mower that has gained popularity among homeowners and landscaping professionals alike. Known for its robust design and user-friendly features, the 550 model stands out in the crowded market of outdoor power equipment.

One of the key features of the White Outdoor 550 is its reliable engine. Equipped with a high-performance 160cc engine, this mower provides ample power for tackling thick grass and uneven terrains. The engine is engineered for efficiency, delivering a consistent cut even in challenging conditions. This makes the 550 an ideal choice for those who have large lawns or varying grass types.

Another defining characteristic of the White Outdoor 550 is its cutting system. The mower offers a 21-inch cutting deck, which allows for a wide cutting path. This not only reduces the time spent mowing but also ensures a uniform finish across the lawn. The adjustable cutting height feature enables users to choose from several height settings, ranging from 1 inch to 3.5 inches, thus accommodating different grass types and personal preferences.

The technology integrated into the White Outdoor 550 enhances its functionality and ease of use. The mower features an ergonomic design with a comfortable handle that minimizes fatigue during extended use. Additionally, the self-propelling feature is a significant advantage, allowing users to maneuver the mower effortlessly across various terrains without compromising on power or efficiency.

Maintenance is made simple with the White Outdoor 550, largely due to its easily accessible components. The mower has a tool-less design for engine access, making oil changes and routine checks straightforward. The durable construction of the mower, coupled with high-quality materials, ensures longevity, making this mower a wise investment for long-term use.

Finally, the White Outdoor 550’s compact size facilitates easy storage, while its lightweight design enhances portability. Whether you are a seasoned landscaper or a homeowner seeking a reliable mower, the White Outdoor 550 combines efficiency, power, and user-friendly features, making it a standout option in outdoor lawn care. Its blend of innovative technology and practical design speaks to the needs of modern users, proving itself as a valuable tool for maintaining a pristine lawn.
Top Page Image Contents