White Outdoor Z - 165 manual Mowing, Avoid Streaking, Pushing Your Unit

MOWING

For best results, consider the following recommendations:

•Mow the first two laps with the discharge pointing toward the center.

•Mow the next two laps with the discharge pointing outside (away from center) for a balanced cut and improved appearance.

•Do not cut grass too short. The mower tends to "scalp" the grass. Shorter grass invites weeds and will yellow quickly in dry conditions.

During some conditions, the mower may leave streaks of uncut material. Streaking can happen when cutting heavy weeds and tall grass. In these conditions it may be necessary to cut the area a second time for a clean cut.

AVOID STREAKING

1.Mow the area often; cutting grass of shorter lengths helps to avoid streaks.

2.Operate the Z-series at full throttle and at a slower forward speed.

3.Maintain sharp blades and replace when worn.

4.Follow the mowing path shown below. (See Figure 12).

Cut Grass

Figure 12

PUSHING YOUR UNIT

To push your unit you will have to first relieve the hydrostatic pumps. Follow steps 1 through 6.

Relief Lever

Lock Position

(Unit will not roll)

Neutral Position

(Unit will roll)

(Left Relief Lever Shown)

Figure 13

15