White Rodgers 1F56W-444 installation instructions Installation Instructions, Description

Models: 1F56W-444

1 6
Download 6 pages 6.05 Kb
Page 1
Image 1
1F56W-444

1F56W-444

WHITE-RODGERSLow Voltage Heating/Cooling Thermostat

INSTALLATION INSTRUCTIONS

Operator: Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

This low voltage thermostat is designed to provide conve- nient control of the heating/cooling system. To provide greater room comfort, the sensitive spiral bimetal is com- bined with an adjustable heating anticipator and a fixed cooling anticipator to provide maximum comfort.

PRECAUTIONS

If in doubt about whether your wiring is millivolt, line, or low voltage, have it inspected by a qualified heating and air conditioning contractor, electrician, or someone familiar with basic electricity and wiring.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and ordinances.

CONTENTS

 

Description

1

Precautions

1

Specifications

2

Installation

2

Select Thermostat Location

 

Route Wires to Location

 

Attach Subbase to Wall

 

Special System Configurations

 

Electric Heat Furnaces (Single Trans-

 

former Systems Only)

 

Two-Transformer Systems

 

Heat Pump Applications

 

Special Application Terminals

 

Attach Thermostat to Subbase

 

Operation & Maintenance

5

Adjusting Heat Anticipator

 

Calibrating Thermostat

 

This control is a precision instrument, and should be handled carefully. Rough handling or distorting compo- nents could cause the control to malfunction.

!CAUTION

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.

Do not short out terminals on gas valve or pri- mary control to test. Short or incorrect wiring will burn out heat anticipator and could cause per- sonal injury and/or property damage.

!WARNING

Do not use on circuits exceeding 30 volts. Higher voltage will damage control and could cause shock or fire hazard.

WHITE-RODGERS DIVISION

EMERSON ELECTRIC CO.

 

PART NO. 37-5026B

Printed in U.S.A.

Replaces 37-5026A

9797 REAVIS ROAD

ST. LOUIS, MISSOURI 63123-5398

 

9622

Page 1
Image 1
White Rodgers 1F56W-444 installation instructions Installation Instructions, Description, Precautions, Contents