•TEMPERATURE DISPLAY ADJUSTMENT — Your new thermostat has been accurately set in our factory. However, if you wish, you may adjust your new thermostat tempera-
ture display to match your old thermostat. This can be accomplished (within a ±4°F range) as follows:
1.Press VIEW PRGM and HOLD TEMP buttons at the same time.
2.Press or to adjust the displayed temperature to your desired setting.
3.Press RUN PRGM to resume normal program operation.
PROGRAMMING YOUR THERMOSTAT
Use the table at the bottom of the page to plan your program time periods, and the temperatures you want during each period. You may also want to look at the sample program table to get an idea of how the thermostat can be programmed.
Entering Your Program
Follow these steps to enter the heating and cooling programs you have selected.
Set Current Time and Day
1.Press SET TIME button once. The display will show the hour only.
Now you are ready to program your thermostat. This section will help you plan your thermostat’s program to meet your needs. For maximum comfort and efficiency, keep the following guide- lines in mind when planning your program.
EXAMPLE:
P
•When heating (cooling) your building, program the tem- peratures to be cooler (warmer) when the building is vacant or during periods of low activity.
•During early morning hours, the need for cooling is usually minimal.
Look at the factory preprogrammed times and temperatures shown below. If this program will suit your needs, simply press the RUN PRGM button to begin running the factory preset program.
| FACTORY PREPROGRAMMING |
| |||
Heating Program for | Cooling Program for | ||||
ALL days of the Week: | ALL Days of the Week: | ||||
PERIOD | TIME | TEMP | PERIOD | TIME | TEMP |
1st | 6:00 AM | 70°F | 1st | 6:00 AM | 78°F |
2nd | 8:00 AM | 62°F | 2nd | 8:00 AM | 85°F |
3rd | 5:00 PM | 70°F | 3rd | 5:00 PM | 78°F |
4th | 10:00 PM | 62°F | 4th | 10:00 PM | 82°F |
If you want to change the preprogrammed times and tempera- tures, follow these steps.
Determine the time periods and heating and cooling tempera- tures for your weekday and weekend programs. You must program four periods for both the weekday and weekend pro- gram. However, you may use the same heating and cooling temperatures for consecutive time periods. You can choose start times, heating temperatures, and cooling temperatures independently for both weekday and weekend programs (for example, you may select 5:00 AM and 70° as the weekday 1st period heating start time and temperature, and also choose 7:00 AM and 76° as the weekday 1st period cooling start time and temperature).
Heating/Cooling Schedule Plan
| WEEKDAY (5 DAY) | WEEKEND (2 DAY) | ||
| Start |
| Start |
|
Period | Time | Temperature | Time | Temperature |
1ST HEAT |
|
|
|
|
|
|
|
|
|
2ND HEAT |
|
|
|
|
|
|
|
|
|
3RD HEAT |
|
|
|
|
|
|
|
|
|
4TH HEAT |
|
|
|
|
|
|
|
|
|
1ST COOL |
|
|
|
|
|
|
|
|
|
2ND COOL |
|
|
|
|
|
|
|
|
|
3RD COOL |
|
|
|
|
|
|
|
|
|
4TH COOL |
|
|
|
|
|
|
|
|
|
2.Press and hold either or until you reach the correct hour (the letter P should be displayed for PM time, which begins at noon).
3.Press SET TIME once. The display window will show the minutes only.
EXAMPLE:
4.Press and hold either or until you reach the correct minutes.
5.Press SET TIME once. The display will show the day of the week.
6.Press or until you reach the current day of the week.
7.Press RUN PRGM once. The display will show the correct time and room temperature alternately.
Enter Heating Program
1.If you want to change the display from Fahrenheit to Celsius (or
2.Press the SYSTEM button until HEAT is displayed.
3.Press VIEW PRGM once. “MO TU WE TH FR” (indicating weekday program) will be displayed. Also displayed are the currently programmed start time for the 1st heating period and the currently programmed temperature (flashing).
SAMPLE
Heating/Cooling Schedule Plan
| WEEKDAY (5 DAY) | WEEKEND (2 DAY) | ||
| Start |
| Start |
|
Period | Time | Temperature | Time | Temperature |
1ST HEAT | 5:30 AM | 68°F | 7:00 AM | 68°F |
|
|
|
|
|
2ND HEAT | 8:00 AM | 65°F | 11:00 AM | 70°F |
|
|
|
|
|
3RD HEAT | 5:00 PM | 70°F | 6:00 PM | 70°F |
|
|
|
|
|
4TH HEAT | 10:30 PM | 65°F | 11:30 PM | 65°F |
|
|
|
|
|
1ST COOL | 6:30 AM | 76°F | 7:00 AM | 76°F |
|
|
|
|
|
2ND COOL | 2:00 PM | 78°F | 12:30 PM | 74°F |
|
|
|
|
|
3RD COOL | 5:00 PM | 72°F | 6:00 PM | 72°F |
|
|
|
|
|
4TH COOL | 10:30 PM | 78°F | 11:30 PM | 78°F |
|
|
|
|
|
6