White Rodgers 1F85-0477 INSTALLER/CONFIGURATION Menu, Press Displayed, Button Factory Default

INSTALLER/CONFIGURATION MENU

With thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display will show

item #1 in the table below. Press Menu button to advance to the next menu item. Press or to change an item option.

INSTALLER/CONFIGURATION MENU

MENU			PRESS	DISPLAYED	Press			or	to
REF.	HP	SS	BUTTON	(FACTORY DEFAULT)	select from listed options					COMMENTS
1	1	1	MENU	(MS 2)	HP 1, HP 2, SS 1					Selects Multi-Stage (MS 2 No Heat Pump),
										Heat Pump 1 (HP 1, 1 compressor),
										or Single Stage (SS 1), Heat Pump 2 (HP 2, 2
										compressor or 2 speed compressor)
2	2	2	MENU	(GAS) for SS or MS			ELE			GAS setting: furnace controls the blower
				(ELE) for HP						ELE setting: thermostat controls the blower
3	3	3	MENU	CS (0)	1, 2, 3, 4, 5, 6					Selects Cool Savings
				(Disabled)						Value 1 (low) to 6 (high), Value 0 Disables Feature
4	4	4	MENU	E (On)			OFF			Selects Energy Management Recovery (EMR)
										On or OFF.
5	–	5	MENU	CR Heat (ME)		SL, FA				Adjustable Anticipation:
										Selects heating cycle rate for MS or SS
6	5	–	MENU	CR Heat Pump		SL, FA				Adjustable Anticipation (Heat Pump) (only
				(ME)						when heat pump selected in #1)
7	6	6	MENU	CR Cool (ME)		SL, FA				Adjustable Anticipation: Selects the cycle rate for
				or						cooling (only when MS 2 or SS 1 is selected in
				CR Emer (FA)			SL			item 1.) or Selects the cycle rate for Emergency
										mode and Auxiliary stage if Heat Pump is
										selected in item 1.
8	7	7	MENU	CL (OFF)		CL On				Compressor Lockout Time
9	8	8	MENU	Heat Auto	Heat Cool Off,					System Mode Configuration
				Cool Off	Heat Off with Fan icon,					with Automatic Changeover capability
					Heat Off without Fan icon
					Cool Off, Auto Off
10	9	9	MENU	dL (On)		dL OFF				Selects Display Light On or OFF
11	10	10	MENU	0	1 HI, 2 HI, 3 HI, 4 HI,					Adjustable Ambient Temperature Display
				(current temperature)	1 LO, 2 LO, 3 LO, 4 LO
12	11	11	MENU	°F			°C			Selects Fahrenheit/Celsius Temperature Display
13	12	12	MENU	L Heat	L 62 to L 89					Selects Limited HEAT Range
				(90)
14	13	13	MENU	L Cool	L 46 to L 82					Selects Limited COOL Range
				(45)
15	14	14	MENU	P7			P3			Defaults for 7 day programming (P7) or 5/1/1
										day programming (P3) is available
16	15	15	MENU	Heat AS (On)			OFF			Automatic Schedule for heat mode.
17	16	16	MENU	Cool AS (On)			OFF			Automatic Schedule for cool mode.
18	17	–	MENU	Heat FA (On)			OFF			Fast Heat option may be disabled by
										selecting OFF. NA to SS config.
19	18	–	MENU	Cool FA (On)			OFF			Fast Cool option may be disabled by
										selecting OFF. NA to SS config.
										NA to Heat only system.
20	19	17	MENU	dS (On)			OFF			Selects Automatic daylight Savings Time option
										On or OFF.
21	20	18	MENU	Change Filter (OFF)			On			Selects Filter Change-out Indicator On or OFF.
			MENU	Change Filter (200 h)	25-1975 h					Change Filter time in 25 hour increments. This
										menu only appears if On is selected in above.
22	21	19	MENU	Cool On (o)	Heat On (b)					Selects operation of the reversing valve terminal
										(O/B) output as an O or B terminal.
23	22	20	RUN							Returns to Normal Operation

6