INSTALLATION
Wiring
All wiring must conform to local and national electrical codes and ordinances.
Connect in accordance with wiring diagrams provided by the equipment manufacturer. If none are provided, the following represents a typical installation.
L1 L2
1 | 3 |
2 | 4 |
Factory 
Installed
Jumper
1
2
SIngle Element Circuit for Full Power Disconnect Through Both Power Conductors
Heating Element
SETTING THE DIAL
Adjust temperature setting by inserting a screwdriver into | Adjustment Slot |
|
open slot and turning pointer to desired temperature on |
|
|
dial. |
|
|
| 150°F | 90°F |
| 66°C | 32°C |
| 125°F/52°C |
|
