White Rodgers F145-1189 installation instructions WHITE-RODGERS Thermostats, PART NO. 37-5161A

F145-1189

Replacement Door for Classic White Digital

WHITE-RODGERS Thermostats

INSTALLATION INSTRUCTIONS

Before installing the new door onto your digital thermo- stat, you will need to attach one of the two operating instruction labels to the new door.

1.Determine the type of thermostat you have. If the two buttons on the far right of the thermostat look like fig.1, you will use the label numbered 153-7090.

If the two buttons on the far right of your thermostat look like fig.2, you will use the label numbered 153- 7075.

2.Place the thermostat door on a table and position it so that the recessed area is facing up, and the door is positioned as shown in fig. 3.

3.Peel the backing off the label you will use. Working from the upper edge, lay the label in place on the door. Gently wipe the label down to remove any air bubbles.

4.To install the door, insert the extruded dimples into the recesses located on the lower right and left edges of the thermostat (it may be necessary to bend the door slightly to fit it into place).

HOLD

COPY

RUN

PRGM

Figure 1

HOLD

TEMP

ADV

PRGM

Figure 2

Recess

	Extruded
	Dimple
	Figure 3. Install door
WHITE-RODGERS DIVISION	PART NO. 37-5161A
EMERSON ELECTRIC CO.
9797 REAVIS ROAD	Printed in U.S.A.
	9241
RST. LOUIS, MISSOURI 63123-5398