Leveling the upright freezer

adequate ventilation and access for service. Never install or operate the unit in an enclosed area, such as a closed cabinet.

Before connecting the upright freezer to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

To ensure proper service access and ventilation, allow at least 4” clearance at rear, and 1” at top and sides. The installation should allow the upright freezer to be pulled forward for servicing if necessary.

When installing the upright freezer under a counter, follow the recommended spacing dimensions shown.

This unit MUST be installed in an area protected from the elements, e.g., wind, rain, water spray or drips. Do NOT use the upright freezer in outdoor setting.

The upright freezer should not be located next to ovens, grills or other high heat resources.

Too much humidity in the air will cause frost to form quickly on the evaporator requiring more frequent defrosting of the upright freezer.

•The upright freezer must be installed with all electrical requirements followed.

•The unit should be located on a hard and level surface that can support the unit when it is full. It is important for the upright freezer to be level in order to work properly. If needed, you can adjust the height of the upright freezer by turning the feet. See the “Leveling the Upright Freezer” section.

•A standard electrical supply (115 VAC only, 60 Hz, 10A), properly grounded in accordance with National Electrical Code and local codes and ordinances is required.

•IMPORTANT: Do not kink or pinch the power supply cord between the upright freezer and wall or cabinet.

It is important for the upright freezer to be leveled in order to work properly. It can be raised or lowered by turning the two feet on the bottom of the machine. If the upright freezer is not leveled during installation. The doors may not close or seal properly, causing cooling, frost, or moisture problems. It is very important that the upright freezer is at level in order to function properly.

Note: The leveling foot under the door hinge is smaller than the other leveling foot.

We recommend using a carpenter’s level to check the machine.

1.Place a carpenter’s level on top of the product to see if the upright freezer is level from front to back and side to side.

2.Adjust the height of the feet as follows:

•Turn the leveling feet to the right to lower that side of the upright freezer

•Turn the leveling feet to the left to raise that side of the upright freezer.

Reversing the Door Swing

Tools needed: Flathead screwdriver, Phillips screwdriver

Note: To avoid injury to yourself and property, we recommend someone assist you during the door reversal process

This appliance has the capability of the door opening from either the left or right side. Please ensure the appliance is unplugged and empty. Please follow the following instructions:

To take the door off, it is necessary to tilt the appliance backward. You should rest the appliance on something solid (e.g. chair) just below the top panel so you can access the bottom of the upright freezer. DO NOT lay the appliance completely flat as this may damage the coolant system.

CUF-210SS specifications

The Whynter CUF-210SS is a standout compact upright freezer, designed to meet the storage needs of households and businesses alike. Its sleek and modern stainless steel design not only enhances the aesthetic appeal of any space but also delivers efficient functionality. With a capacity of 2.1 cubic feet, it offers ample storage space to keep your frozen goods organized without taking up too much room, making it an ideal choice for apartments, dorms, or small kitchens.

One of the most notable features of the CUF-210SS is its adjustable temperature control, which allows users to set the ideal freezing conditions between -10°F to 2°F. This range is perfect for accommodating various types of food items, from meats and seafood to ice cream and frozen vegetables. The manual defrost design ensures that users can easily maintain optimal performance by removing frost buildup, further enhancing the appliance's longevity and efficiency.

Another key characteristic of the Whynter CUF-210SS is its energy efficiency. It operates with an energy-efficient compressor that minimizes electricity consumption, making it an environmentally friendly and cost-effective solution for preserving food. In fact, its energy-saving features may significantly contribute to lower electricity bills over time.

The interior of the CUF-210SS is designed with practicality in mind, featuring a removable shelf that allows for customizable storage options. This flexibility enables users to accommodate larger items or bulk purchases without hassle. Additionally, the door is reversible, allowing for versatile installation and easy access regardless of your kitchen layout.

Safety is also a priority with this freezer, as it comes equipped with an integrated handle and a secure door lock to prevent accidental opening. This feature is particularly beneficial for households with young children or in commercial settings where safety comes first.

In conclusion, the Whynter CUF-210SS is a reliable and stylish solution for all your freezing needs. Its combination of compact design, efficient temperature control, energy-saving capabilities, and practical features makes it an excellent choice for anyone looking to augment their freezing capabilities without compromising on space or style. Whether you're looking to keep your favorite foods frozen or store bulk items, this upright freezer delivers on performance and versatility, making it an invaluable addition to any home or office.

Whynter CUF-210SS instruction manual Leveling the upright freezer, Reversing the Door Swing

Models: CUF-210SS