4. Installation
Before using your wine cooler
∙Remove the exterior and interior packaging material
∙Stand the unit upright for approximately 2 hours before connecting to the power source. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
∙Clean the interior surface with a soft cloth and warm water.
∙Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
∙Do not place the appliance in an enclosed space or under direct sunlight or sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase the ambient temperature and electrical consumption. Extreme cold or hot ambient temperatures may also cause the appliance to malfunction.
∙Allow up to 24 hours of operation for the wine bottles to reach the desired temperature.
Electrical Connection
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician.
This appliance should be properly grounded for your safety. The power cord of this unit is equipped with a
Use of extension cords is not recommended.
This unit requires a standard
To prevent accidental injury, the power cord should be secured behind the wine refrigerator and not left exposed or dangling.