[ 2 ]
1. Place a paper filter into the brew cone.
Pour ground coffee into the filter.
2. Slide the brew cone into place. When pushed in against the stop,
the brewcone fits into the slide rails and centers
it under the sprayhead.
3. Place a clean coffee decanter on the warmer plate.
4. To start brewing, push in the momentary brew switch,
located on the front panel. The brew cycle will take
approximately three minutes to complete.
5. The warmer plates keep the coffee at serving temperature.
To activate the warmers, push the desired warmer switch,
located on the front panel.
COFFEE BREWING
l FOLLOW ALL BREWING AND WARMING INSTRUCTIONS.
l HOT COFFEE! ALLOW BREWCONE TO FINISH DRIPPING.
l USE ONLY CURTIS APPROVED ACCESSORIES.
WARNING
TO HELP AVOID PERSONAL INJURY: