Why worry about water?
The Scale is Tipped Against You.
Most water supplies contain high levels of scale-causing
minerals (primarily calcium and magnesium) that build up on the heat- ing elements, tanks, valves and other parts of your coffee brewing equipment. Excessive scale can cause increased service calls and com- plicate refurbishing of brewing equipment.
The Chlorine Connection.
Coffee is made up of 98% water. Consequently, the quality of the water greatly affects the quality of the brewed beverage. Municipal water supplies are treated with chlorine as a disinfectant. If not removed, the chlorine may react with the coffee, producing a bitter, unpleasant taste and odor.
Simply The Best Solution.
Both
Don’t Water Down Your Profits.
Offer your customers the very best brew possible and insure your quality coffee brewing equipment investment with a quality water filtra- tion system. Curtis® Water Filtration Systems.
The Clear Answer – CURTIS® Water Filtration Systems.
Curtis Water Filtration Systems are specifically designed for
coffee brewing equipment. Advanced HydroBlend™ technology delivers effective scale and corrosion control, and enhanced
filtration components provide superior chlorine taste and odor removal for a better tasting gourmet beverage. Plus, Curtis Filters feature an extra large filtration medium which provides proper water flow well past the recommended replacement cycle –
eliminating clogged filters and unnecessary service calls.
Engineered for the Rigors of High
Temperature Brewing.
Most filters are designed for cold water applications. The HydroBlend™ technology used in Curtis Water Filtration Systems, is engineered to excel under high temperature conditions, providing unparalleled scale control for your brewing equipment.
Installation and Replacement is Simple!
1. Unpack the water filter system.
Components include filter cartridge and head with mounting bracket.
2. Locate space for filter installation.
For wall mounting allow 2” space under the filter for cartridge removal.
3.Make connection to feed head using 3/8” Male NPT connectors.
(Do not over tighten! If using a brass compression fitting, use a back up wrench when tightening the compression nut.)
4.Install the cartridge into the head.
Line up the posts in the filter head with the grooves on the cartridge. Push upward into the head until it seats, then turn clockwise 1/4 turn until the filter stops.
To remove, turn
CSC10 |
CSC15 |
CSC00H |
Specifications |
| Rated |
|
| Pressure | Temperature |
| Ship. |
|
Application/Description | Life* | Flow | Micron | Range | Range | Water | Wt.** | Cube** | |
| (Gallons) | (GPM) | Rating | (psi) | (°F) | Connection | (lbs.) | (cu. ft.) | |
|
|
|
|
|
|
|
|
|
|
CSC10AC00 with Head | Chlorine & Sediment Removal, Scale Prevention/OCS | 10,000 | 1.65 | 10 | 3/8” FNPT | 17 | 1.23 | ||
|
|
|
|
|
|
|
|
|
|
CSC10CC00 Cartridge Only | Chlorine & Sediment Removal, Scale Prevention/OCS | 10,000 | 1.65 | 10 |
| 15 | 1.23 | ||
|
|
|
|
|
|
|
|
|
|
CSC15AC00 with Head | Chlorine & Sediment Removal, Scale Prevention/OCS | 15,000 | 2.0 | 10 | 3/8” FNPT | 23 | 1.69 | ||
|
|
|
|
|
|
|
|
|
|
CSC15CC00 Cartridge Only | Chlorine & Sediment Removal, Scale Prevention/OCS | 15,000 | 2.0 | 10 |
| 21 | 1.69 | ||
|
|
|
|
|
|
|
|
|
|
*Rated Life is for Chlorine Removal. To ensure proper control of scale, filters should be replaced every 6 months. ** Shipping Weight and Cube are per cases of 6.
WILBUR CURTIS COMPANY, INC.
6913 Acco Street, Montebello, CA
Telephone:
Fax:
www.wilburcurtis.com
Find the latest on the web at www.wilburcurtis.com
© 2004 Wilbur Curtis Company, Inc. | Printed In U.S.A · JUL/04 – 12727 |
