Monterey Home Furnaces
Model Number |
| Btu/hr | Btu/hr | Efficiency Percentages | Face Panel Dimensions |
| Type of | Shipping | ||||
| Input | Output | Gas Connection | |||||||||
|
|
|
|
|
|
|
| |||||
Natural | Propane |
| Thermal | AFUE | Width | Depth | Height | Control | Weight (lbs.) | |||
| Rating | Rating |
| |||||||||
|
|
|
|
|
|
|
|
|
|
| ||
MONTEREY HOME FURNACES |
|
|
|
|
|
|
|
| Conversion Kit Available | |||
2509622 | 2509621 |
| 25,000 | 19,350 | 77.0 | 71.0 | 16" | 6" | 65¾" | ½" | Millivolt Wall | 83 |
3509622 | 3509621 |
| 35,000 | 25,930 | 74.0 | 69.0 | 16" | 6" | 65¾" | ½" | Millivolt Wall | 83 |
MONTEREY HOME FURNACES - |
|
|
|
|
|
| Conversion Kit Available | |||||
5009622 | 5009621 |
| 50,000 | 38,500 | 77.0 | 71.0 | 16" | 6" | 65¾" | ½" | Millivolt Wall | 137 |
MONTEREY |
|
|
|
|
|
|
| Conversion Kit Available | ||||
3509622.6 | - |
| 32,000 | 24,000 | 75.0 | 69.0 | 16" | 6" | 65¾" | ½" | Millivolt Wall | 83 |
Gas Connection: ½" · All models are rated for 4,500' elevation
Features
"Matchless" Pilot Igniter
All models include a "matchless" pilot igniter. Assures convenient pilot lighting without matches.
Automatic Thermostat - Included with all models
(No Electricity Required)
All models are equipped with a
Contemporary Finish
Dimensions and Clearances
Monterey Models4" to intersecting wall
16" from top of appliance to ceiling
Clearances requirements may vary by area
Clearance requirements may vary
by local codes
115V Outlet |
|
| B/W Vent | |
For Optional |
|
| Plaster to | |
Blower |
|
|
| |
|
|
| Header | |
| 9⅛" |
|
| |
|
|
| Plasterground | |
|
|
|
| Rear Register |
|
|
|
| Models Only |
Nailing Tab |
|
|
| Plasterground |
62¼" | 14⅛" Min. | 45"45" | ||
Header |
| 14⅜" Min. |
| 2" x 4" |
of |
| Alternate |
| |
Bottom |
|
| 4"4" Studs | |
| Gas Stub |
| ||
|
| 16" cc | ||
|
| Location |
|
|
| 2" x 4" Plate | 2" |
|
| |
25,000 & 35,000 Btu/hr | Vent |
4½" Min |
|
| |
5⅜" Max | 16" | 6" | |
Panel | |||
|
| ||
|
| ||
50,000 Btu/hr |
|
| |
|
| Vent | |
4½" Min |
|
| |
5⅜" Max | 16" | 6" | |
Panel |
Accessories
Blower
Attaches to top of Monterey furnaces with on/off switch or automatic operation. Improves circulation of warm air and reduces temperature differences
in the room. Optional deluxe blower for increased air flow, 125 CFM.
Two blowers may be used on 50,000 Btu/hr. |
|
Model 2901, shipping weight 9 lbs. |
|
Model 2907, shipping weight 9 lbs. | Motorized |
| Model |
Rear-Outlet Register
Model 6901 for Monterey, shipping weight 4 lbs. Model 6905 Plasterground, shipping weight 1 lb. Model 6919 for Monterey with a recessed installation. Model 6920 for Monterey with
High-Altitude Models
Conversion Kits
Oval-Vent Starter Kit
Contains starter hold down plate,
Vent Adapter
With blower installed, Model 9910, shipping weight 3 lbs. Without blower installed, Model 9902, shipping weight 3 lbs.
Freestanding Kit
Allows
Important
·Read owner's manual before using/installing.
·Photographs are representative only.
·Specify propane or natural gas when ordering.
·Check local codes and ordinances for permitted uses.
·Consult installation manual for clearances prior to installation.
·We reserve the right to amend product specifications without notice.
·Installation and servicing recommended by a qualified service person.
·Please read the warranty, for any limitations or disclaimers. Combustion chamber carries a
·Venting must comply with the "Venting and Chimney Requirements" section of installation manual.
·Massachusetts approval
250 West Laurel Street · Colton, California 92324 USA
(909)
Homeowner Assistance: (909)
recessed. Ideal for remodeling in existing masonry wall construction or when studding is substandard. Model 4901, shipping weight 23 lbs.
Replacement Face Panel
Model 4915, shipping weight 30 lbs.
RequiresNo Electricity
Great During
Power Outages
© Williams Furnace Co. | Printed in the U.S.A. | All Rights Reserved | Subject to Change without Notice | L1073, 5/08 |