Williams Sound Bid Specs, Personal PA Wideband Receiver, Model PPA R7-4NA, Williams Sound

Personal PA™ Wideband Receiver, Model PPA R7-4NA

Bid Specs:

The receiver shall be housed in an impact resistant poly-propylene case with a hinged battery door that does not separate from the receiver. The receiver shall be a body-pack style with a wrist lanyard.

The receiver shall have a 3.5 mm mono earphone jack and accommodate low impedance mono earphones, head- phones and neckloop telecoil couplers. The 3.5 mm jack shall also serve as a charging jack for rechargeable batter- ies.

The receiver shall operate on one 9 volt battery and shall have a power LED next to the earphone jack. The receiver shall have a combination on/off rotary volume control and a four position switch to select between frequencies 72.1, 72.5, 72.9, or 75.7 MHz. These frequencies shall be pre-tuned and are adjustable by means of internal tuning coils.

The receiver shall receive FM signals in the 72-76MHz audio assistance band with 75 µs de-emphasis. The receiver shall provide a maximum output of 250mW at 16 Ohms with an earbud-type earphone. The system electrical fre- quency response shall be 100Hz to 10kHz, ± 3dB and the signal-to-noise ratio shall be 50dB at 10µV. The receiver shall accept wideband deviation of 75 kHz p-p.

The receiver shall be covered by a five-year parts and labor warranty, excluding earphones, headphones, bat- teries and chargers.

The receiver shall be the Williams Sound Corp. model PPA R7-4NA.

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Williams Sound ®

©2005, Williams Sound Corp. MCAT 037A Helping People Hear 2