WIR RX14-2 Receiver: 2.3 MHz or 2.8 MHz
Instructions For Use & Care
RECYCLING INSTRUCTIONS
OPERATING INSTRUCTIONS
SAFETY INFORMATION
Hearing Safety:
CAUTION!
This product is designed to amplify sounds to a high volume level which could potentially cause hearing dam- age if used improperly. To protect your hearing and the hearing of others:
1.Make sure the volume is turned down before putting on the ear- phone or headphone before adjust- ing the volume to a comfortable level.
2.Set the volume level at the mini- mum setting that you need to hear.
3.Do not allow children or other unauthorized persons to have access to this product.
BATTERY SAFETY & DISPOSAL
CAUTION!
Do not attempt to recharge dispos- able batteries, which may explode, release dangerous chemicals, cause burns, or other serious harm to the user or product.
PACEMAKER SAFETY
CAUTION!
1.Before using this product with a pace- maker or other medical device, con- sult your physician or the manufactur- er of your pacemaker or other medical device.
2.If you have a pacemaker or other med- ical device, make sure that you are using this product in accordance with safety guidelines established by your physician or the pacemaker manufacturer.
Help Williams Sound protect the environment! Please take the time to dispose of your equipment properly.
Product Recycling:
Please do NOT dispose of your Williams Sound equipment in the household trash. Please take the equipment to a electronics recycling center; OR, return the product to the factory for proper disposal.
Battery Recycling:
Please do NOT dispose of used batteries in the household trash. Please take the batteries to a retail or community collection point for recycling.
5/10/06
APPROVALS
This product meets approval standards established for:
RoHS WEEE
FRONT VIEW
1.Turn the receiver’s Power Switch to ON.
2.Place the headset on your head and adjust the headband size by pulling or pushing on each earpiece.
3.Locate and adjust the individual volume controls for a comfortable listening level.
4.Choose between 2.3 MHz or 2.8 MHz operation by pressing the frequency selector button on the left earphone. NOTE: Be sure the infrared transmitter being used is transmitting on 2.3 MHz or 2.8 MHz!
IMPORTANT
The infrared receiver “eye” is located directly above the battery compartment (see illustration). Do not cover it up or you will lose reception.
Note: To maximize battery life, turn the receiver OFF when it’s not in use.
FRM 451G ©2007 Williams Sound Corp
2
3