Product may vary slightly from what is illustrated.
A
†1. Removable cutting assembly (part #
2.Geared wheel
3.Guide bar
4.Lever
†Consumer replaceable/removable parts
How to Use
This product is for household use only.
Note: See CARE AND CLEANING for assembly instructions.
1.Remove all packaging materials before using.
2.Place the can opener on a level surface and plug into 120 V~ 60 Hz electrical outlet.
3.Hold can approximately level.
4.Raising lever, place can under guide bar and against geared wheel.
5.Press down on lever to pierce lid of can. This also starts the cutting action. Let go of lever and the can will stop automatically when opened.
6.Grasp the can; then, raise the lever up from the can.
7.Slide the lid away from the magnet. Use caution to avoid injury from sharp edge of lid.
HINT FOR USING THE CAN OPENER
•To open extra tall cans, place can opener at edge of counter before wedging can in position for opening.
Important: Do not use the can opener for more than 5 minutes at a time. Allow to cool for at least 15 minutes before using. This will prevent motor burnout due to overheating.
3 | 4 |
