Windsor 86221950 manual Troubleshooting

Models: 86221950

1 24

Page 10

PROBLEM.	CAUSE	SOLUTION

Little or no solution flow	Clogged spray jet on	Remove and clean jets
Little or no solution flow	cleaning tool	Remove and clean jets
	cleaning tool
	Faulty pump	Check and replace pump.
	Faulty pump

	Incorrectly attached	Ensure solution hose coupler is securely attached to
	solution hose	the coupler on the solution tank.
Loss of vacuum/	Incorrectly attached vac	Ensure vac hose is pushed completely onto the
Solution recovery	hose	recovery tank inlet.
	Obstruction in cleaning	Inspect for and remove any debris.
	tool	Inspect for and remove any debris.
	tool
	Recovery tank is not
	securely mounted on the	Tighten latch on either end of the machine.
	solution tank.

4-2	86221950 02/20/07

Image 10

Contents

Operating Instructions GB/USA 120V MODELS ONLY MINI-EXTRACTOROperating Instructions MODEL MACHINE DATA LOG/OVERVIEWYOUR DEALER DATE OF PURCHASEHOW TO USE THIS MANUAL TABLE OF CONTENTSGROUP PARTS LIST SAFETYHOW TO USE THIS MANUAL IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINESAVE THESE INSTRUCTIONS HAZARD INTENSITY LEVEL FOR SAFETYWHEN SERVICING MACHINE HAZARD INTENSITY LEVELEXTENSION CORDS GROUNDING INSTRUCTIONSELECTRICAL GROUNDING INSTRUCTIONSLysol MACHINE OPERATIONSSoftener Perchlorethylene percPERIODIC MAINTENANCE MAINTENANCEDAILY MAINTENANCE SOLUTION PUMP REPLACEMENTTROUBLESHOOTING TROUBLESHOOTING86221950 04/27/07 86221950 04/27/07 DESCRIPTION EXTRACTOR GROUPPRV NO 86221950 04/27/07SOLUTION PUMP GROUP SOLUTION PUMP GROUP 230V MACHINES WIRING DIAGRAM120V MACHINES WIRING PARTS LIST HAND TOOL 86221950 02/20/07HAND TOOL MINI CART 86221950 02/20/075-10 MINI CART5-11 CART86221950 02/20/07 5-12 CARTSUGGESTED SPARE PARTS 5-13