Winegard AP8700 manual Instructions, Made In U.S.A, Preamplifier Installation, Dual Input Models

Models: AP8700

1 2
Download 2 pages 29.14 Kb
Page 1
Image 1
WINEGARD®

WINEGARD®

Chromstar® 2000

Antenna Preamplifiers

MADE IN U.S.A.

INSTRUCTIONS

Models AP-2870 & AP-2880 Dual Input, 82 Channel

Models AP-8275, AP-8700 & AP-8780, AP-8800, & HDP-269 82 Channel

Models AP-4700 & AP-4800 UHF Only

Models AP-3700 & AP-3800 VHF Only

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE POWER SUPPLY SECTION OF THIS APPLIANCE TO RAIN OR MOISTURE.

NOTE

If FM interference is a problem in your area, it is recom- mended that you temporarily hook up the preamplifier near the TV for ease of tuning the variable FM trap.

PREAMPLIFIER INSTALLATION

STEP 1. Mount the preamplifier on the mast within easy reach. See Figure 1.

NOTE

The further the preamplifier from the antenna(s), the lower the input signal.

STEP 2. Slide weather boots over the antenna downlead(s) and attach connectors. See Figure 2.

STEP 3.Attach the antenna downlead(s) to antenna(s) and other end(s) to preamplifier, leaving a sufficient slack in the cable(s) to form a drain loop. See Figure 3.

STEP 4. Slide the weather boots over the cable connector(s) and boot collar(s) on the preamplifier and antenna(s).

STEP 5. The 75 ohm coaxial downlead may be secured to the mast with weatherproof tape or cable ties.

STEP 6. Attach “F” connector on downlead cable from preamp to Power Injector jack marked “ANT”. See figure 4.

STEP 7. Attach “F” connector on cable from DTV, Digital

Converter box, Distribution Amplifier, or splitter system to jack on Power Injecter marked TV. See figure 4.

STEP 8. Connect one “F” connector on supplied black RG-6

cable to jack on Power Injecter marked “PWR IN”. Connect the other “F” connector on supplied RG-6 cable to jack on supplied AC Adapter (Wall Transformer). See Figure 4.

STEP 9. Mount power injector to wall using supplied screws. Plug in AC Adapter (Wall Transformer) into household wall

outlet.

Fig. 1

SUPPORT

 

 

PLATE

 

MAST

HEX NUT

U-BOLT

PREAMPLIFIER

300 OHM DOWNLEAD

 

 

HOUSING

Fig. 2

WEATHER

 

BOOTS

Fig. 3

CONNECTORS

 

 

 

 

 

SINGLE INPUT MODELS

 

 

 

PREAMPLIFIER

 

 

 

 

 

MAST

 

 

 

CLAMP

 

ANT.

 

 

 

INPUT

 

 

 

 

 

TO POWER

 

DRAIN LOOP

 

SUPPLY

 

 

 

 

 

75 OHM COAXIAL

 

 

DOWNLEAD

DUAL INPUT MODELS

 

 

 

PREAMPLIFIER

 

MAST

 

 

 

 

VHF

 

CLAMP

 

INPUT

 

 

 

UHF

 

 

 

INPUT

 

TO POWER

 

 

 

SUPPLY

 

DRAIN LOOP

75 OHM COAXIAL

 

DOWNLEAD

 

 

Fig. 4

DOWNLEAD COAX CABLE FROM

 

 

PREAMP OR AMPLIFIED ANTENNA

 

 

ANT.

 

POWER

 

 

INJECTOR

AC ADAPTOR

 

 

 

(SUPPLIED)

 

 

TV

 

 

 

 

POWER IN

 

COAX CABLE TO

 

 

 

DIGITAL TV, DIGITAL

 

 

LED

CONVERTER BOX,

 

 

DISTRIBUTION AMP,

 

 

 

 

6’ STANDARD

 

OR SPLITTER (SYSTEM)

 

COAX CABLE

 

 

 

(SUPPLIED)

 

 

Page 1
Image 1
Winegard AP8700 manual Instructions, Made In U.S.A, Preamplifier Installation, Single Input Models, Dual Input Models