Slide the crimped end of the front assembly boom into the open end
of the back assembly boom (Figure 4). Re-insert the screw into the
plastic block closest to the mast clamp, and secure with the flange nut.
Figure 4Crimped End
Then, slip the phasing lines onto the threaded rivets near the reflector
brackets. Add a washer onto each rivet. Thread a small nut onto each
rivet. See Figure 5.
Figure 5Screw
Insertion
Site
5
Unfold the elements on the two corner reflectors as in Figure 6. You
should hear the pieces click into place.
AfterBefore
Figure 6Top View Side View
Reflector Bracket
Phasing
Lines Phasing
Lines
Rivet
Front Assembly Back Assembly
Mast
Clamp
Corner Reflector