WINEGARD®
Model PR-8800 UHF Antenna
WARNING
READ THE ACCOMPANYING SAFETY INSTRUCTION SHEET BEFORE PROCEEDING WITH ANTENNA AND/ OR MAST ASSEMBLY AND INSTALLATION. INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.
Step 1. Unfold elements on reflector booms and driven element booms.
90 DAY LIMITED WARRANTY
Step 2. Attach stacking booms to reflector booms with bolts and hex nuts supplied, Figure 1.
Step 3. Attach driven element booms to reflector booms with bolts and hex nuts supplied, Figure 1. Bolting together using the support braces on each side.
Step 4. Attach downlead connection with attached stacking bars to driven elements, Figure 2.
Step 5. Connect matching transformer (may not be included depending on model) to the coax cable downlead.
Step 6. Connect matching transformer to the downlead connection. Loosen wing nuts, and slide spade lugs of matching transformer between the washers. Tighten wing nuts securely.
Step 7. Mount antenna on top of mast and lightly tighten mast clamps.
Step 8. Connect the coax downlead to your TV, but do not secure at this time. Rotate antenna for best picture.
Step 9. Tighten the mast clamps securely, Figure 3.
Step10. Secure coaxial downlead to the mast using tape to prevent whipping by the wind.
Reflector
Boom
Mast Clamp
Stacking
Bars
Mast Clamp
Reflector
Elements
Point Front Towards
TV Stations
Driven Element Boom
Stacking
Boom
Matching
Transformer
Downlead
Connection
Driven
Elements
75 Ohm Coaxial
Downlead
Step11. Ground antenna and mast per accompanying Safety Instruction sheet.
Mast
Driven Element Boom | Reflector Boom | Driven | Mast Clamp |
|
| Hex Nut | |
|
| Element | |
|
|
| |
| Driven | Boom | Mast |
| Elements |
| |
|
| Clamp Insert | |
|
|
| |
| Support |
|
|
| Braces |
|
|
| Stacking |
| |
| Boom |
| |
|
|
| |
|
|
| Masting |
|
| Stacking |
|
Figure 1 | Figure 2 | Bars | Figure 3 |
Printed in U.S.A. © Winegard Company 2001 • Winegard Company • 3000 Kirkwood Street • Burlington, IA