Winegard AP-8700 Preamplifier Power Inserter, Existing Coax Connection Preamplifier Connections

Grounding

Block

Wiring Diagram for FREEVISION® Antenna with Preamplifier, Grounding Block & Existing Coax Connection

FREEVISION®

Antenna

Point toward

stations.

Preamplifier

Note: ground wire (#8 or larger) must run from grounding block to ground rod (not shown here).

Power

Inserter

IN	OUT
	OUT

Existing Coax

Connection*

Preamplifier Connections	Coax Connection on TV
Underside of Preamplifier

Antenna Input	Power Supply Input	Antenna/Cable In
		Coax Port

b	le
Ca
Coax

*The existing coax connection must be a splitter that is AC/DC passive on one leg only. The power supply must be connected to the AC/DC passive leg of the existing coax connection.

Refer to the National Electronic Code for antenna grounding specifications.

Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 • 800-288-8094 • fax 800-247-8221 • www.winegard.com • Printed in U.S.A. ©2011 Winegard Company • WC-1051