Wolf CT36EU Overall Dimensions, Specifications Installation Specifications, Installation Notes

Model CT36EU

36" Unframed Electric Cooktop

Overall Dimensions

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

41/4" (108) 51/2" (140)

CONDUIT

Unit dimensions may vary by ± 1/8".

Specifications

Installation Specifications

Overall Width			36"
Overall Height			41/4"
Overall Depth			21"
Heating Element Outer Diameter
(1) Triple			12"
(1) Dual			9"
(3) Single			(2) 8" and 61/2"
Bridge Element Dimensions			8" x 17"
Recommended Cabinet Width			39"
Minimum Cabinet Width			36"
Minimum Cabinet Depth			223/4"
Minimum Height Clearance*			41/2"
Countertop Cut-Out		343/8" W x 193/8" D
Electrical	240 V AC / 60 Hz / 50 amp
Requirements	208 V AC / 60 Hz / 40 amp
Conduit		4' flexible 3-wire
Electric Rating		10.5 kW at 240 V AC
		7.9 kW at 208 V AC

13" max
(330)	18"
	(457)
SEE COUNTERTOP
CUT-OUT BELOW
4" min (102)
24" min	36" (914)
(610)	STANDARD
	FLOOR TO
	COUNTERTOP
	HEIGHT

		39" (991)
					30" (762)
2"* min (51)			RECOMMENDED CABINET WIDTH
				36" min (914)	COUNTERTOP TO
CUT-OUT TO						COMBUSTIBLE
COMBUSTIBLE				SEE COUNTERTOP		MATERIALS
	MATERIALS			CUT-OUT BELOW	ABOVE COOKTOP
(BOTH SIDES)

41/2" (114)
31/2" (89)	E
4" min (102)	10"
TO OVEN
	(254)
OPENING
36-INCH OVEN OPENING

Shipping Weight 60 lbs

*Minimum 61/4" clearance is required between countertop and any combustible surface directly below the cooktop.

Installation Notes

Complete installation specifications can be found on our website, wolfappliance.com.

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

						361/8"** (918)
									RECESSED AREA FOR
							FLUSH MOUNT INSTALLATION ONLY
	RECESSED AREA FOR		15/16" (33)			34 3/8" (873)
FLUSH MOUNT INSTALLATION ONLY				RADIUS				COOKTOP CUT-OUT WIDTH
	COUNTERTOP									2"* (51)
7/8"		PROFILE							7/16" (11) RADIUS
			211/8"** (537)
	(22) max		RECESSED AREA			19 3/8" (492)
			FOR FLUSH MOUNT								COOKTOP
			INSTALLATION ONLY							CUT-OUT DEPTH
					19/16" (40)
5/16" (8)
								FRONT OF COUNTERTOP
**Minimum dimension, but may be exceeded by up to 1/8" (3).						2 7/16" (62)

Dimensions in parentheses are in

millimeters unless otherwise specified.