Wolf DD45R, DD45I dimensions C T I N G C O N S I D E R a T I O N S

Planning Information

Models DD45I and DD45R Downdraft Systems

D U C T I N G C O N S I D E R A T I O N S

Except for Models DD30I, DD36I and DD45I, which include a 500 CFM internal blower, Wolf downdrafts are shipped without the blower assembly. In-line and remote blower assemblies are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.

IMPORTANT NOTE: Install this downdraft ventilation system only with a Wolf blower.

Wolf downdraft systems have an adjustable discharge that will allow you to negotiate ducting around floor joists and other obstacles. Three different discharge locations are available with side to side adjustment for accurate align- ment of ductwork. Refer to the illustration below for discharge location options.

CENTERLINE OF COUNTERTOP CUTOUT				163/8" (416)
						INTERNAL BLOWER
					211/2" (546)
						REMOTE BLOWER
		CL
221/8" (562)					RIGHT
					DISCHARGE
INTERNAL BLOWER
					LOCATION
19" (483)
REMOTE BLOWER
				51/2" (140)
			INTERNAL BLOWER
	LEFT			41/4" (108)
				REMOTE BLOWER
	DISCHARGE
	LOCATION
						DISCHARGE CUTOUT
						DIMENSIONS:
						101/4" (260) x 31/2" (89)
						INTERNAL BLOWER
						141/4" (362) x 31/2" (89)
CENTERLINE OF COUNTERTOP CUTOUT						REMOTE BLOWER
		CL
						ADJUSTMENT:
				1" (25) - 7" (178)
						INTERNAL BLOWER
						21/2" MAX (165)
						REMOTE BLOWER
ADJUSTMENT:				51/2" (140)
5" MAX (127)
REMOTE BLOWER			INTERNAL BLOWER

	41/4" (108)
BOTTOM
	REMOTE BLOWER
DISCHARGE
LOCATION

Discharge location options for internal and remote blower models.

NOTE: Measurements are to centerline of duct cutouts

Dimensions in parentheses are in

millimeters unless otherwise specified. 6