Wolf DO30U, DO30F dimensions L Series Built-In Double Ovens, Planning Information

Planning Information

L Series Built-In Double Ovens

M O D E L S D O 3 0 F A N D D O 3 0 U

I N S T A L L A T I O N N O T E S

Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.

For ease of installation, Wolf recommends using a 33" (838) wide cabinet with the L Series double oven. You will need a minimum 24"

(610)of usable cabinet depth. The cabinet base platform must be able to support 400 lbs (181 kg).

Wolf L Series built-in ovens have a face trim on all four sides and will overlap stiles and rails. The trim overlaps 1/8" (3) on the bottom, 3/16"

(5) on the top and 3/4" (19) on each side.

L Series double ovens require a separate, grounded 4-wire 240/208 V AC, 60 Hz, 50 amp service with its own circuit breaker. It is provided with a 5' (1.5 m) flexible 4-wire conduit for connection at the electrical supply.

IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recom- mended that the electrical supply be placed in an adjacent cabinet within reach of the conduit. Refer to the illustration on page 4 for location of electrical supply.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

The Wolf L Series double oven may be installed in combination with a Wolf warming drawer with L Series stainless steel drawer front or integrated drawer front. For additional specifications, refer to the warming drawer section of our website, wolfappliance.com.

Refer to the installation instructions shipped with each Wolf product for detailed specifications.

Dimensions in parentheses are in

millimeters unless otherwise specified. 5