Wolf TYG60C, TYG48C Installation Requirements, NOTE In the Commonwealth of Massachusetts

MODEL: TYG

GAS TEPPAN-YAKI GRIDDLE

INSTALLATION REQUIREMENTS:

1.A gas pressure regulator sized for this unit is included. Natural Gas 5.0" W.C. Propane Gas 10.0" W.C.

2.Gas line connecting to appliance must be ¾" diameter or larger. If flexible connectors are used, the inside diameter must be the same as the ¾" iron pipe.

3.Leveling bolts at bottom of chassis must be adjusted for proper grease drainage.

4.Ventilation slots around side and back perimeter must be located above the counter surface for sufficient ventilation and proper combustion.

5.These units are manufactured for installation in accordance with National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (lat- est edition). Copies may be obtained from The American Gas Association, Accredited Standards Committee Z223 @ 400N. Capital St. NW, Washington, DC 20001, or the Secretary Standards Council, NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471.

NOTE: In the Commonwealth of Massachusetts

All gas appliances vented through a ventilation hood or exhaust system equipped with a damper or with a power means of exhaust shall comply with 248 CMR.

NOTE:  In line with its policy to continually improve its product, Wolf Range Company

reserves the right to change materials and specifications without notice.

This appliance is manufactured for commercial use only and is not intended for home use.

F-39077 (04-07)