Manuals / Wolf Appliance Company / Kitchen Appliance / Cooktop

Wolf Appliance Company CT36I/S dimensions Installation N O T E S

Models: CT36I/S

1 7
Download 7 pages 52.8 Kb
Page 5
Image 5

Planning Information

New 36" (914) Induction Cooktop

M O D E L C T 3 6 I / S

I N S T A L L A T I O N N O T E S

Refer to the illustrations and specifications for overall dimensions, cut-out dimensions and installation specifics.

Wolf recommends using 39" (991) cabinets with the 36" (914) induction cooktop.

Clearance is required for the terminal block located on the bottom of the cooktop in the right rear corner.

IMPORTANT NOTE: A minimum height clear- ance of 6" (152) is required between the coun- tertop and any combustible surface directly below the cooktop. This includes upper edges of drawers located directly below unit. If a shelf is installed below the unit, a 1" (25) gap at the rear of the cabinet shelf is necessary to allow for proper ventilation. Failure to do so could result in decreased performance or product damage.

A Wolf downdraft system, Cooktop or Pro ventilation hood is recommended. When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to countertop. Also refer to the ventilation recommendation charts in the cooktop or Pro ventilation sections of our website, wolfappliance.com.

The Wolf 36" (914) induction cooktop requires a separate, grounded 3-wire 240/208 V AC, 50/60 Hz, 50 amp service with its own circuit breaker. It has a 4' (1.2 m) flexible 3-wire conduit for connection at the electrical supply. Locate electrical within the shaded area shown in the Installation illustration on page 4.

A Wolf built-in single oven may be installed below this cooktop. For this installation, the electrical supply for the cooktop should be installed in the adjacent cabinet. Refer to the illustration on page 6 for specifications. Be aware of the depth of the cooktop when planning for this installation.

IMPORTANT NOTE: When a built-in oven is installed below the cooktop, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in an adjacent cabinet within reach of the conduit.

IMPORTANT NOTE: Wolf induction cooktops are designed and agency approved for installa- tion with Wolf built-in ovens only.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

If the 36" (914) induction cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width increases to 35" (889). When multiple cooktops or modules are installed side by side, refer to the countertop cut-out dimen- sions on page 7.

Refer to the installation instructions shipped with each Wolf product for detailed specifications.

This cooktop is intended for indoor use only.

Dimensions in parentheses are in

millimeters unless otherwise specified.

5

Page 4 Page 6
Page 5
Image 5
Wolf Appliance Company CT36I/S dimensions Installation N O T E S
Page 4 Page 6

CT36I/S specifications

The Wolf Appliance Company CT36I/S is a state-of-the-art induction cooktop that embodies the brand’s commitment to professional-grade performance and design. With its sleek stainless steel finish and modern aesthetic, this cooktop not only enhances the functionality of your kitchen but also elevates its visual appeal.

One of the standout features of the CT36I/S is its advanced induction technology. Unlike traditional gas or electric cooktops, induction cooking uses electromagnetic energy to directly heat pots and pans, allowing for faster cooking times and precise temperature control. This ensures that the heat is concentrated only where it is needed, resulting in energy efficiency and reduced cooking time.

The cooktop boasts six induction elements, providing a diverse cooking surface that can accommodate multiple pots and pans simultaneously. Each element offers a range of power levels, allowing cooks to achieve the perfect simmer, sear, or rapid boil. The elements are designed to heat up quickly, ensuring that your culinary creations can come to life without unnecessary delays.

Safety is a top priority for Wolf, and the CT36I/S features several built-in safety technologies. The cooktop includes an automatic shut-off feature that engages after a certain period of inactivity, minimizing the risk of accidents. Additionally, the induction elements only heat the cookware, making the surrounding surface cool to the touch, which significantly reduces the chances of burns.

Another noteworthy characteristic of the Wolf CT36I/S is its intuitive touch controls. The interface is user-friendly, allowing for easy adjustments and precise control over cooking temperatures. Whether you are an experienced chef or a home cook, the functionality of this cooktop is designed to provide confidence in your cooking abilities.

The sleek design also allows for seamless integration into any kitchen layout, and its trimless design enables a clean, modern look. Furthermore, the cooktop is equipped with a powerful ventilation system that ensures a safe and comfortable cooking environment by effectively removing smoke and odors.

In summary, the Wolf Appliance Company CT36I/S induction cooktop is a perfect blend of form and function. With its innovative induction technology, safety features, and ease of use, this cooktop is ideal for anyone looking to enhance their culinary experience. With Wolf's reputation for excellence, the CT36I/S is an investment that will surely elevate any kitchen.