I N S TA L L AT I O N I N S T RU C T I O N S

M O D U L E I N S TA L L AT I O N

B E F O R E O P E R AT I N G

To prevent pollution from entering the controls area, attach the foam strip to the underside of the module frame. Refer to the illustration below.

Gently lower the grill module into the cut-out area in the countertop and center. Check that the front edge of module is parallel to the front edge of the countertop. Check that all required clearances are met.

To attach the brackets to the sides of the module, insert the clip into the rectangular punchout in the pan, and push down. Install the clamping screw into the bracket and tighten until the screw contacts the underside of the countertop. Do not overtighten screws. Refer to the illustration below.

IMPORTANT NOTE: Do not use caulk or silicone to seal the module to the countertop. The unit must be readily removable for service.

Read the entire Wolf Grill Module Use & Care Information included with the module. Impor- tant safety, service and warranty information is contained within the book.

Thoroughly clean the grilling grate, grease deflection plates and grease collection pan with mild soap and water before use.

Foam strip

Installation brackets

10

Page 10
Image 10
Wolf Appliance Company ICBIG15/S installation instructions F O R E O P E R At I N G