Wolf Appliance Company IF15/S manual Overall Dimensions, Installation Specifications

Electric Fryer Module

OVERALL DIMENSIONS

21" (533)

15"
(381)
	71/2" (191)
6"
(152)	1/2" (13)
DRAIN	SIDES
OUTLET	1" (25)
	FRONT / BACK	Unit dimensions may vary by ± 1/8".

SPECIFICATIONS

INSTALLATION SPECIFICATIONS

Exterior Finish	Stainless Steel
Overall Width	15"
Overall Height	131/2"
Overall Depth	21"
Heating Element	2600 W
Minimum Cabinet Depth	223/4"
Minimum Height Clearance	131/2"
Countertop Cut-Out Width	14"
Countertop Cut-Out Depth	191/4"
Electrical Requirements	240/208 V AC
60 Hz, 15 amp circuit
Conduit	4' flexible 3-wire
Electrical Rating	2.6 kW at 240 V
	1.9 kW at 208 V
Shipping Weight	30 lbs

SIDE
CABINET
13" (330)
max
SEE COUNTERTOP
CUT-OUT BELOW
123/8"
(314)	75/8"
DRAIN
OUTLET	(194)

36" (914)

FLOOR TO

COUNTERTOP

30" (762) min

COUNTERTOP

TO COMBUSTIBLE			18" (457) min
	MATERIALS
7" (178) TO			7" (178) TO
COMBUSTIBLE*		COMBUSTIBLE*

123/8"	131/2"
(314)	(343)
DRAIN	6"
OUTLET	(152)
E	15"
	(381)
15" (381)

INSTALLATION NOTES

IMPORTANT NOTE: This fryer module must be installed at least 15" away from any open flame cooking device. The open flame may cause ignition of oil.

IMPORTANT NOTE: This fryer module must be installed at least 15" away from a Wolf steamer module, as contact between water and hot oil may cause burns from steam and hot oil.

Complete installation specifications can be found on our website, wolfappliance.com.

*Minimum clearance from cooktop cut-out to combustible materials up to 18" (457) above countertop.

NOTE: Fryer module must be installed in base cabinet with access to valve at bottom of unit to drain oil into heat-resistant receptacle. Application shown allows for installation of two 15" (381) modules side by side.

	14" (356)
Countertop Cut-Out Dimensions	CUT-OUT
	WIDTH

2" (51) min*

			191/4" (489)
				CUT-OUT
				DEPTH
		FRONT		21/2" (64) min
Dimensions in parentheses are in	COUNTERTOP CUT-OUT
millimeters unless otherwise specified.

©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 8/10