SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

„Do not stop, start, or change directions sud- denly on slopes.

„Use extreme care and reduce ground speed on slopes and rough terrain.

„Watch for hidden hazards on the terrain during operation.

„Stop power unit and equipment immediately upon striking an obstruction. Turn off engine, remove key, inspect, and repair any damage before resuming operation.

TRANSPORTATION

„Always comply with all state and local lighting and marking requirements.

„Never allow riders on power unit or attachment.

„Do not operate PTO during transport.

„Watch for hidden hazards on the terrain.

„Do not operate or transport on steep slopes.

„Do not operate auxiliary hydraulics during transport.

„Do not operate or transport equipment while under the influence of alcohol or drugs.

MAINTENANCE

„Before dismounting power unit or performing any service or maintenance, follow these steps: disengage power to equipment, lower the 3-point hitch and all raised components to the ground, operate valve levers to release any hydraulic pres- sure, set parking brake, stop engine, remove key, and unfasten seat belt.

„Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.

„Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

„Never go underneath equipment (lowered to the ground or raised) unless it is properly blocked and secured. Never place any part of the body under-

neath equipment or between moveable parts even when the engine has been turned off. Hydraulic system leak down, hydraulic system failures, mechanical failures, or movement of control levers can cause equipment to drop or rotate unexpect- edly and cause severe injury or death. Follow Oper- ator's Manual instructions for working underneath and blocking requirements or have work done by a qualified dealer.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

„Make certain all movement of equipment com- ponents has stopped before approaching for ser- vice.

„Frequently check blades. They should be sharp, free of nicks and cracks, and securely fastened.

„Do not handle blades with bare hands. Careless or improper handling may result in serious injury.

„Your dealer can supply genuine replacement blades. Substitute blades may not meet original equipment specifications and may be dangerous.

„Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„Make sure shields and guards are properly installed and in good condition. Replace if damaged.

„Wear gloves when installing belt. Be careful to prevent fingers from being caught between belt and pulley.

STORAGE

„Block equipment securely for storage.

„Keep children and bystanders away from stor- age area.

™

59C-2 Safety Rules (Rev. 6/22/2007)

Safety 5

Page 4 Page 6
Page 5
Image 5
Woods Equipment 59C-2 manual Transportation, Maintenance, Storage
Page 4 Page 6

59C-2 specifications

The Woods Equipment 59C-2 is a robust and versatile implement that embodies the quality and durability associated with the Woods brand. Designed for compact tractors, this rotary cutter is a perfect solution for maintaining pastures, fields, and overgrown areas. It offers a combination of efficiency and performance, making it a favorite among agricultural operators and landowners alike.

One of the main features of the 59C-2 is its rugged construction. Built with a heavy-duty frame and premium materials, this cutter can withstand the rigors of daily use. Its 59-inch cutting width allows it to cover substantial areas quickly, increasing productivity. The cutter's design is also optimized for maneuverability, making it effective in tight spaces and around obstacles.

A standout characteristic of the Woods 59C-2 is its heavy-duty heat-treated blades. These blades are engineered to provide a clean and precise cut, ensuring that grass and brush are evenly trimmed. The blades are also replaceable, allowing users to maintain optimal cutting performance over time. This feature significantly reduces maintenance costs and extends the life of the cutter.

In terms of technology, the 59C-2 incorporates a slip clutch protection system. This system is essential for safeguarding the tractor and implement from potential damage caused by unexpected obstacles. When the blades encounter a tough object, the slip clutch disengages, preventing undue strain on the drivetrain and ensuring a longer lifespan for both the tractor and rotary cutter.

Another notable aspect of the Woods 59C-2 is its adjustable cutting height capability. Operators can easily set the desired height from 1.5 to 4 inches, allowing for flexibility in different mowing conditions and crop types. This adaptability is particularly beneficial for varying terrain and growth levels, providing a tailored approach to land management.

To facilitate easy attachment to a variety of compact tractors, the Woods 59C-2 features a universal mounting system. This design ensures a quick and straightforward setup, allowing operators to switch between implements seamlessly.

Overall, the Woods Equipment 59C-2 rotary cutter stands out for its durable construction, advanced technology, and versatile features, making it an excellent choice for anyone looking to maintain their property with efficiency and ease. Whether tackling tall grass or thicker brush, this implement demonstrates the quality performance that Woods Equipment is known for.
Top Page Image Contents