SUB-FRAME & BACKHOE TO TRACTOR

 

WARNING

Mount Sub-Frame & Backhoe to Tractor

 

W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

νThe sub-frame mount is designed to provide secure mounting and adequate operator clear- ance when properly installed. Check clearance dimensions shown in figure 1 to be sure you have installed sub-frame correctly. Follow all mounting instructions in this manual. Do not operate back- hoe unless there is adequate clearance. Failure to check and comply with these instructions may result in serious injury or death.

νThe only time the backhoe may be operated from a position other than the operator seat is during backhoe attachment and removal. Opera- tor must

•Read Sub-Frame Mounting Kit Manual instructions on attaching and removing back- hoe and use extreme care

•Always stand between rear tire and back- hoe stabilizer arms or along side of tractor to avoid being trapped should the boom swing control be accidentally activated.

νRemove seat and upper support assembly before installing or removing backhoe from trac- tor. Failure to comply may result in equipment fail- ure and/or personal injury.

1.Remove the backhoe seat assembly.

2.Place sub-frame flat on a hard level surface.

3.Back tractor over the sub-frame and center between the tractor rear tires. Position tractor so that the hydraulic system can be connected. Shut off trac- tor, set brake, remove key.

4.Install pump (see Connect Hydraulic System sec- tion, next page).

5.Start tractor.

NOTE: You will use the backhoe hydraulics to maneu- ver the sub-frame into position. Use care in this pro- cedure to avoid being trapped between tractor and backhoe or between backhoe parts.

6.Raise rear of sub-frame up by lowering stabilizers and boom section until even with channels of rear mount.

7.Drive tractor back so that crosstube slides into channel. Shut off tractor, set brake, remove key.

8.Fasten sub-frame in place by placing clevis pins into channel holes and secure with safety pins.

9.With the tractor engine off, relieve pressure in the backhoe boom and stabilizers to raise sub-frame into front hanger.

10.Install bent pin and klik pin in front hanger mount.

11.Reinstall seat.

12.Start tractor and put backhoe into transport posi- tion (see backhoe operator’s manual).

NOTE: Install swing lock before transporting.

PN-59756 (Rev. 4/9/01)

Installation 13

Page 14 Page 16
Page 15
Image 15
Woods Equipment BH6500 manual SUB-FRAME & Backhoe to Tractor, Mount Sub-Frame & Backhoe to Tractor
Page 14 Page 16

BH6500 specifications

The Woods Equipment BH6500 is a robust and versatile hydraulic backhoe designed for a variety of construction and landscaping tasks. Renowned for its durability and performance, the BH6500 offers a blend of efficiency and flexibility, making it an excellent choice for contractors, landscapers, and homeowners alike.

One of the standout features of the Woods BH6500 is its impressive digging depth. With a maximum digging depth of approximately 7 feet, the backhoe is designed to tackle deep excavations, trenching, and utility installations. The ability to gain access to deeper areas enhances its functionality for both commercial and residential projects.

Powering the BH6500 is a series of advanced hydraulic technologies that ensure smooth and precise operation. The hydraulic system provides exceptional breakout force, enabling users to lift and move heavy materials with ease. This capability is essential for digging, lifting, and backfilling applications, allowing operators to complete tasks quickly and efficiently.

The BH6500 is equipped with a variety of bucket options, including standard buckets, ditching buckets, and specialized attachments. This versatility allows users to customize the backhoe based on their specific needs, whether it’s digging, lifting, or grading. The easy change-out of attachments further adds to its convenience, minimizing downtime during projects.

In terms of compatibility, the Woods BH6500 is designed to be used with a wide range of tractors, significantly enhancing its usability. This feature allows users to maximize the investment in their existing equipment while expanding their operational capabilities.

Comfort and safety are also prioritized in the design of the BH6500. The ergonomic control layout and operator-friendly features improve ease of use, allowing operators to focus on their tasks without unnecessary strain. Safety mechanisms are integrated to protect users during operation, ensuring peace of mind while working on demanding jobs.

Overall, the Woods Equipment BH6500 is characterized by its strength, versatility, and advanced technology. Whether you are engaged in landscaping, construction, or agricultural work, this hydraulic backhoe provides the necessary power and functionality to complete tasks efficiently, making it a reliable partner for any project. With its array of features, the BH6500 stands out as a valuable asset in the world of machinery and equipment.
Top Page Image Contents