Model D2056
Deluxe Tool Table
Instruction Sheet
Phone #: (360)
The Model D2056 Shop Fox Deluxe Tool Table is designed to give you a solid, stable work surface. This table has a 700 lb. capacity and yet it is light enough to be portable. The flared steel legs and cross bracing top and bottom provide a solid foundation for the 13" x 23" x 1" butcher block style work surface. Adjustable rubber feet assure a firm grip even when the floor surface may not be level. The table top is 30 1⁄2" high, providing a comfortable working height for a variety of benchtop machinery.
INVENTORY
PART # | DESCRIPTION | REF |
XD2056001 | TABLE TOP | 1 |
XD2056002 | TABLE LEG | 4 |
XD2056003 | CORNER BRACKET | 4 |
XD2056004 | TOP BRACE W/ LOGO | 2 |
XD2056005 | SHORT BRACE | 2 |
XD2056006 | LONG BRACE | 2 |
XD2056007 | ADJUSTABLE FEET | 4 |
XPHTEK37 | TAP SCREW #10 X 3⁄4" | 20 |
XPTLW02M | EXT TOOTH WASHER 5MM | 32 |
XPN06M | HEX NUT | 32 |
XPS08M | PHLP HD SCR | 32 |
Do not use the D2056 Shop Fox® Deluxe Tool Table until you have fully read and understood this instruction sheet, and have completed the entire assembly procedure. Serious personal injury may occur.
ASSEMBLY INSTRUCTIONS
Tools Required: Drill, 1⁄8'' drill bit, Phillips® screwdriver, 8mm or 5⁄16" open end wrench and a pencil.
1.Begin by loosely assembling the table legs and braces. On a table or the floor lay out two legs, the longer lower brace, the upper brace (with Shop Fox® logo) and two corner brackets (refer to the photo above for positioning). Using the shorter bolts (with nuts and star washers), attach the long brace to the inside of the legs. Next attach the corner brackets to the outside edge of the legs. Use the short bolts to attach one side of the bracket to the outer corner of the leg. Use the longer bolts to attach the upper brace to the front edge of the corner bracket. Only hand tighten all the bolts and nuts for now.
2.Now take these two leg assemblies and assemble the two short braces to the inside of each leg using the
COPYRIGHT © SEPTEMBER, 1999 BY WOODSTOCK INTERNATIONAL, INC. REVISED APRIL, 2010 (TR)
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#2121HV | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in China |
