ADJUSTMENTS

TEMPLATE ADJUSTMENT

The template is adjustable from front to back so that the 3.

For side pieces thicker than 7/8", add 1/8" to the

joint will be hidden when the dovetails are complete.

amount that the board exceeds 7/8". Then, set the

Adjustment is made by loosening the two template lock

front edge of the template fingers back from the

knobs. Do not adjust the screws holding the template.

edge by that sum. See Figure 13 and 14.

To adjust the template to the proper position:

 

1.Mount your drawer pieces in the jig. The horizon- tal piece must be tight and flush with the top of the vertical piece. When mounted correctly, the top edge of the vertical piece sits flush with the top of the horizontal piece. See Figure 11.

 

y

 

A

1/8" + y

7/8"

 

 

y = (Thickness of A) - 7/8"

 

 

 

 

 

 

 

Figure 13. Correct template adjustment for stock thicker

 

Figure 11 shows the proper positioning between the hori-

 

than 78".

 

zontal and vertical workpieces when mounted in the dove-

 

 

 

tail jig.

 

 

 

 

2.For side pieces that are 7/8" thick and less, slide the template so the front edge of the template fingers are 1/8" back from the top edge of the vertical piece. See Figure 12.

1/8"

7/8" or Less

Figure 14 shows the template set back an additional 1/8" for

a 1" thick board. The inside faces are showing.

Figure 12. Correct template adjustment for stock 78" thick

and less.

- 10 -

Woodstock Intl., Inc. D2796

Page 12
Image 12
Woodstock D2796 manual Template Adjustment, To adjust the template to the proper position