Instruction Sheet

Model D3244

Heavy Duty Wagon

INTRODUCTION

The SHOP FOX® Model D3244 Heavy Duty Wagon makes hauling cargo a breeze with its high wooden sides.

Check the inventory list below Figure 1 to ensure all the parts are present. All fasteners require a hex nut, lock washer and flat washer.

To assemble the Model D3244, do these steps:

1.Turn the wagon bed upside down and attach the rear axle and axle braces with the M6-1 x 16 flat head screws.

2.Attach the steering assembly pieces with the M10-1.5 x 20 carriage bolt, then insert the cotter pin.

3.Secure the steering assembly to the underside of the wagon bed with the M6-1 x 16 flat head screws.

4.Install the wheels on the axles with the air valves and cotter pins facing out, and secure the axle caps.

5.Attach the handle to the steering assembly with the M6-1 x 75 button head screw.

6.Attach the wooden side panels with the M6-1 x 45mm button head screws in this order: 1) Left side panel 2) rear panel 3) right side panel and 4) front panel.

CAUTION—ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHEN USING THIS WAGON.

Figure 1. Wagon fully assembled.

INVENTORY LIST

(1) Wagon Bed

(1) Handle

(4) Tires

(2) Steering Assembly

(4) Long Wooden Panels

(1) Rear Axle Assembly

(2) Rear Axle Braces

Hardware Bag 1

(1)Button Head Screw M6-1 x 75

(5)Cotter Pins

(1)Special Carriage Bolt M10-1.5 x 20

(1)Hex Nut M10-1.5

(1)Flat Washer 12mm

(1)Lock Washer 10mm

(4)Flat Washers 16mm

(19)Hex Nuts M6-1

(19)Flat Washers 6mm

(19)Lock Washers 6mm

(8)Flat Head Screws M6-1 x 16

(10)Button Head Screws M6-1 x 45

(4)Axle Caps

COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. NOVEMBER 2003, PRINTED IN CHINA.

Page 1
Image 1
Woodstock D3244 instruction sheet Instruction Sheet, Heavy Duty Wagon, Inventory List, Introduction