Woodstock D3277 instruction sheet Instruction Sheet, Gravity Feed Spray Gun

Instruction Sheet

Model D3277

Gravity Feed Spray Gun

INTRODUCTION

This gravity feed spray gun with a 1.4mm nozzle includes an in-line regulator for precise control and a chrome finish for easy clean-up.

SETUP

Attach the regulator to the base of the spray gun, then attach the airline to the regulator with a 1⁄4 NPT fitting. Use the adjustment knob on the regulator to set the air pressure to 30 PSI.

ADJUSTMENTS

See Figure 1 to identify the location of the spray gun controls and adjust in the following order:

1.Fluid Control—Adjusts the trigger travel, which affects the volume of paint released.

2.Air Flow Control—Adjusts the volume of air that mixes with the paint, and thus, increases or decreases the paint atomization.

3.Pattern Control—Variably adjusts the spray pattern from round to a wide fan.

4.Nozzle Control—Adjusts the spray pattern from vertical to horizontal.

OPERATIONS

Hold the sprayer 6"–8" from the workpiece, and keep the spray gun perpendicular to the workpiece during strokes. DO NOT pivot your wrist when spraying!

MAINTENANCE

1.Clean the spray gun by flushing it with thinner; however, DO NOT immerse the gun in the thinner!

2.Regularly clean the filter between the container and spray gun.

3.To avoid internal damage, only use the included brush when cleaning inside the spray gun orifices.

Nozzle		Fluid
Control	Control
		Air Flow
		Control

Pattern

Control

Figure 1. Model D3277.

EXPLOSION HAZARD! Do not spray flammable fluids near an open flame or ignition source.

EYE INJURY AND RESPIRATORY HAZARD! Always use safety glasses and respirator rated for paint and solvent vapors while using sprayer.

CUSTOMER SERVICE

For questions contact Woodstock International Technical Support at (360) 734-3482, or send e- mail to: tech-support@shopfox.biz.

COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

SEPTEMBER 2003, PRINTED IN CHINA.