Woodstock D4033 instruction sheet Operation, Maintenance and Care, Parts, Description

D4033 Drill Press Table Instructions

Operation

•Periodically verify the mounting clamps are snug, and never overtighten the hand knobs.

•To avoid drilling into the table, make sure that the drill press depth stop and drill bit alignment are correct.

•Use the table only in dry environments.

•Wipe down workpieces to ensure they are free of debris that may scratch the table.

•Remove the center plate (#4 in Parts) from the table if you need to perform a through-drilling operation.

Maintenance and Care

•Keep your cast iron drill table and column rust- free with regular applications of a high-quality rust preventive product.

•To avoid condensation and rust between the two tables, do not leave the Model D4033 table mounted on the drill press table for long periods of time.

•Clean the Model D4033 drill press table by vacuuming out T-slots when finished and wiping down the table and fence with any good household glass cleaner. Periodically lightly oil the hand knob threads and the studs.

-2-

Parts

12 16 3

15

13
	4	11
		8
17		2
10		14
		8
		7
1		6
		5

REF PART #		DESCRIPTION
1	XD4033001	CLAMP BAR
2	XD4033002	TAPE SCALE
3	XD4033003	KNOB
4	XD4033004	TABLE INSERT
5	XPW01M	FLAT WASHER 8MM
6	XD4033006	HOLDDOWN
7	XD4033007	STUD
8	XPFH39	FLAT HEAD SCR 6-32 X 7/16
10	XD4033010	THREADED FLANGE
11	XD4033011	T-SLOT BOLT M8-1.25 X 75
12	XD4033012	T-SLOT BOLT M8-1.25 X 35
13	XD4033013	KNOB M8-1.25
14	XD4033014	TABLE
15	XD4033015	STOP BLOCK
16	XD4033016	FENCE
17	XD4033017	T-TRACK