Model D4070/D4077 Electric Hoist
SETUP
Unpacking
The electric hoist was carefully packaged for safe shipping. If you discover any damage after you have signed for delivery, immediately call Customer Service at (360)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condition of the shipment, you should inventory the contents.
| Inventory |
|
Model D4070/D4077 Inventory (Figure 2) | ||
A. | Electric Hoist | 1 |
B. | Mounting Brackets | 2 |
C. | Pulley Lift Hook | 1 |
D. | Flat Washers |
|
| 8mm (D4070) | 4 |
| 10mm (D4077) | 4 |
E.External Tooth Washers
8mm (D4070) | 4 |
10mm (D4077) | 4 |
F. Hex Bolts |
|
4 | |
4 | |
A |
|
B |
|
C | D |
| E |
| F |
Site Considerations
Weight Capacity
Refer to the weight capacity listed in Specifications on Page 3. When choosing a mounting site, verify that the lifting structure can withstand at least the maximum loading capacity as well as any possible overloading that may occur.
Working Clearances
Consider existing and anticipated needs, dimensions of your lifting platform, size of material to be lifted, and whether you need the hoist to be mobile or in a stationary location when establishing an installation site for your electric hoist.
Power Supply
The Model D4070/D4077 requires a NEMA
5 ft. cord, but may require an extension cord to connect to power. If an extension cord is required, use a 14 gauge cord that is NOT longer than 50 ft.
When establishing a site for your hoist, make sure the control switch can be reached and that outlets are located near the hoist so power or extension cords are clear of
