Instruction Sheet
Model SB1215, SB1216, SB1217
Precision Drill Press Vise
Models SB1216 and SB1217 are heavy! Get the assistance of a second person when lifting or placing the vise. Wear heavy duty leather boots for foot and toe protection, and keep hands and fingers away from all pinch points. Ignoring this warning can lead to a severe crushing injury or finger amputation!
Specifications
Hardened Steel Jaws | ......................................... Yes |
Yes | |
Leadscrew Type | Acme Thread |
Epoxy Paint | Yes |
Net Weight (SB1215) | ................................. 18.5 lbs. |
Net Weight (SB1216) | ............................... 39.05 lbs. |
Net Weight (SB1217) | ............................... 75.05 lbs. |
Operation |
|
1.Place the vise on a clean and
2.Clamp or bolt the vise to the table. Do not overtighten the clamps or fasteners.
3.Position the workpiece between the jaws and tighten the jaws with the handle. Never use a cheater pipe to increase leverage, or you may damage the vise. If you like, unthread the knob and remove the handle (Figure 1), so that a socket and ratchet can be used on the end of the leadscrew drive hex. However, never use any type of impact wrench to tighten the leadscrew.
| Hardened steel |
| jaws for |
Acme thread for | durability. |
maximizing vise | |
clamping pressure | |
and long thread life. | cast iron |
| vise body. |
Removable handle smooth operation. for socket use on
leadscrew hex drive.
Figure 1. Features.
Care & Maintenance
•Keep leadscrew and ways clean and oiled.
•Avoid leaving the vise clamped to a cast iron
•Stone away any burrs in the jaws or leadscrew threads.
•Never hammer on vise or a workpiece clamped in vise.
•Never subject vise to flame or water.
If you need help, contact us at: PHONE: (360) 734-1540
FAX: (360) 676-1075 (International)
FAX: (360)
